Weather-Rite TT Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 185 / 205

SECTION 27: T
ROUBLESHOOTING
179 of 198
Table 49: Dia g nostics Menu pro g rammin g
Max Valve VDC (Glo b al Setting for MP2+ system)
2 Scroll to max v al v e VDC, press .
3 Max Val v e VDC, set v oltage v al u e (7 V to 25 V), press .
4 **Stored** w ill flash 4 times to confirm entry.
Max Ramp VDC
2 Scroll to Max Ramp VDC, press .
3 Max Ramp VDC, set v oltage v al u e (5 V to 24 V), press .
4
**Stored** w ill flash 4 times to confirm entry.
NOTE: Voltage can not b e set greater than Max Val v e VDC.
Total Bandwidth
2 Scroll to Total Band w idth, press .
3 Total Band w idth, set Band w idth (5° F (-2.8 °C) to 15 °F (8.3 °C)), press .
4 **Stored** w ill flash 4 time to confirm entry.
Offset
2 Scroll to Offset Temp, press .
3 Offset Temp Process #, scroll to Set Point #, press .
4 Offset Temp Process #, set Offset (-10° F (-5.6 °C) to 10 °F (5.6 °C)), press .
5 **Stored** w ill flash 4 times to confirm entry.
6 Repeat steps 2 - 5 for Set Points #(2-8)
Rampin g
2 Scroll to Ramping, press .
3 Ramping Process #, scroll to Set Points #, press .
4 Ramping Process #, set Ramp Rate (Off, 60 to 900 Deg/Hr), press .
5 **Stored** w ill flash 4 times to confirm entry.
6 Repeat steps 2-5 for Set Points #92-8)
Timers (TM02 re q uired)
2 Scroll to Timers, press .
3 Timer Process #, scroll to Set Point #, press .
4 Timer Process #, scroll to Timer 1 or Timer 2, press .
5 Timer 1: T1 Proce #, scroll to Vie w Ho u rs, Clear Ho u rs or Set Alarm Ho u rs, press .
Vie w Ho u rs
a. XXX Ho u rs
Clear Ho u rs
b . Are yo u s u re? scroll for Y or N, press .
c. If Y, Timer 1 Hrs Clear flashes to confiirm entry.
Set Alarm Ho u rs
d. T1 Proc # Alarm, scroll to set hrs, press .
e. Set Timer1 Alarm flashes to confirm entry.
6 Timer 2: T2 Proc #, scroll to Vie w Ho u rs or Clear Ho u rs, press .
Vie w Ho u rs
a. XXX ho u rs.
Clear Ho u rs
b . Are yo u s u re? scroll for Y or N, press .
c. If Y, Timer 2 hrs Clear flashes to confirm entry.
7 Repeat steps 2 - 6 for Set Points #(2-8)
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
1 Scroll to the Processes Men u , press .
Max Proc Temp (Glo b al Setting for MP2+ system)
2 Scroll to Max Proc Temp, press .
ENT
ENT