Wazer WAZER Main Unit Скачать руководство пользователя

Страница: 9 / 69

•

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

•

Be careful removing cut materials from the water jet cutter. Cutting with a water jet cutter

creates sharp edges. Improper handling of cut materials may result in cuts and abrasions.

•

Do not let familiarity gained from frequent use of water jet cutters allow you to become

complacent and ignore water jet cutter safety principles. NEVER expose yourself to the

water jet stream. A careless action can cause severe injury within a fraction of a second.

Water jet cutter use and care

•

Prevent idle water jet cutters from being used by children and do not allow persons

unfamiliar with the water jet cutter or these instructions to operate the water jet cutter.

Water jet cutters can be dangerous in the hands of untrained users.

•

Maintain water jet cutters. Check for misalignment or binding of moving parts, breakage of

parts, water leaks, clogged waste water drains and any other condition that may affect the

water jet cutter’s operation. If damaged, have the water jet cutter repaired before use. A

poorly maintained water jet cutter may result in a risk of shock, fire and/or serious injury.

•

Disconnect the plug(s) from the power source and the water supply before performing any

maintenance. Such preventive safety measures reduce the risk of starting the water jet cutter

accidentally.

•

Use the water jet cutter in accordance with these instructions, taking into account the

working conditions and the work to be performed. Use of the water jet cutter for operations

different from those intended could result in a hazardous situation.

Service

•

Have your water jet cutter serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the water jet cutter is maintained.

Safety instructions for water jet cutters

•

Never expose yourself to the water jet stream since it may cause severe injury and water jet

injuries are prone to infection. Proper use and care of this water jet cutter are essential to

safe operation. Severe infections can lead to serious medical problems and cause death.

•

Do not attempt to modify or defeat the safety interlock system for any reason. This could

result in exposure to the water jet stream.

•

Never allow the water jet cutter to operate without constant supervision of the cutting

process. If the machine malfunctions, immediately follow the manufacturer’s instructions for

shut down.

•

Never operate a water jet cutter without proper drainage for the waste water system.

Before use inspect the drainage to ensure proper water flow is not blocked. While in

operation water jet cutters create a continuous flow of waste water which can quickly flood

surrounding areas if not drained away, flooding may increase the risk of personal injury and

electric shock, and may cause water damage to property.

•

Never operate a water jet cutter with broken or kinked high-pressure hose lines. Always

ensure the positioning of the hose line is unlikely to cause people to trip, or the kink, loop

and tensile force to be excessive during operation

•

Never cut any unknown or toxic materials and properly dispose of waste products. Always

refer to the Safety Data Sheet (SDS) from the material manufacturer to determine if it is safe

to return water contaminated by cut material to the water system. Follow local regulations

to properly dispose of all waste products including water, spent abrasive and cut material

debris.

•

Keep the interior of the water jet cutter, clean and free of debris. Clean the cutting head and

abrasive supply hose. A build-up of cutting and engraving residue and debris is dangerous

and may increase the risk of improper performance or an environmental hazard such as

clogging, overflowing, and jamming.

WAZER Safety Precautions

In addition to the “General Power Tool Safety Warnings” in the previous section

we have outlined a set of WAZER specific safety precautions. In general, this entire User Manual is

filled with important safety information – please read it carefully and ensure that anyone that uses

WAZER has read this User Manual as well. Before setting up and using WAZER, read and follow all

instructions and safety messages. ALWAYS be aware of and comply with all federal, state, and local

safety regulations, industry standards, and internal company safety guidelines.

Environment and Machine Location

•

WAZER operators should ensure anyone within 10 feet of the WAZER follows the proper

safety precautions.

•

WAZER should be installed in an area that allows the machine to be monitored while cutting.

Usage

•

WAZER can cause serious injury and should be accessible only to those that have read this

User Manual and are capable of understanding the risks associated with this tool. Ensure

the WAZER location will never result in an untrained individual using the machine.

•

If WAZER is intended to be used by multiple people, put an orientation and training program

in place at the facility to ensure correct usage.

•

Do not setup, operate, or perform maintenance on the machine under the influence of illicit

drugs, alcohol, or over-the-counter and prescription drugs that can impair one’s ability to

operate heavy machinery safely.

•

All operators of WAZER must be aware of the Power Switch, On/Off Valve, and water shutoff

locations.

•

Do not use WAZER or its components in any manner or for any other purpose other than as

specifically instructed in this User Manual.

•

Do not modify WAZER or its components.

•

Never leave WAZER unattended while in operation.

•

All operators of WAZER must follow the safety precautions outlined in the Safety Data Sheet

of WAZER approved Abrasive.

•

Use of non-WAZER approved Abrasive can result in equipment or property damage as well

as personal injury.

•

All operators must follow the safety precautions outlined in the Safety Data Sheets for the

materials cut on WAZER.

•

Always follow the correct startup, operating, and shutdown procedures outlined in this User

Manual.

Saf

y |

TION 2

Содержание WAZER Main Unit






































































Результаты поиска

Содержание WAZER Main Unit

Отзывы:

Похожие инструкции для WAZER Main Unit

Бренды по названию

Популярные бренды

Wazer WAZER Main Unit, Руководство пользователя

Результаты поиска

Содержание WAZER Main Unit

Отзывы:

Похожие инструкции для WAZER Main Unit

Бренды по названию

Популярные бренды