Wazer WAZER Main Unit Скачать руководство пользователя страница 4

Страница: 4 / 69

Introduction

Congratulations! You have one of the very first desktop waterjet

cutters ever built. This User Manual will help you get started.

elcome to the WAZER User Manual. Your safety, and the safety of others, is very

important. Please read this entire document before setting up or using your new

WAZER. The warnings and instructions contained in this manual are for your safety.

Failure to follow safety warnings and instructions could result in serious injury or death.

This User Manual must always be kept with WAZER and should remain with WAZER if it is

transferred or sold.

This manual contains information that is subject to change. We will work to continually improve

the product and experience and update this User Manual. Images are provided for reference and

may be slightly different from your product. For the most up-to-date version of this User Manual,

as well as other product documentation, notices, and knowledge articles please see our online

Resources at www.wazer.com/resources. If you have any questions or concerns, contact our

Customer Support.

This Manual Includes:

•

Safety

WAZER is a powerful system; please read, understand, and follow these safety guidelines to

avoid damage or injury.

•

About WAZER

You will learn about the operating principles of WAZER and familiarize yourself with its

components. It may be tempting to skip this section, but understanding these concepts will be

helpful every time you use WAZER.

•

Setting Up WAZER

Walk through the process of setting up WAZER. It is important to follow the instructions here

very carefully to ensure the successful operation of your WAZER.

•

Cutting with WAZER

Learn how to operate your WAZER and walk through making your first cut.

•

Wam / Creating Cut Files

Prepare your own design for cutting on WAZER using our dedicated Wam software.

•

Maintenance

Like any tool, WAZER requires maintenance. These sections will instruct you about the basics,

and also teach you what to do if you run into problems while cutting.

•

Disassembly and Decommission

Instructions on how to properly and safely disassemble and decommission WAZER after it

reaches the end of life.

SECTION

WAZER Customer Support is here to help.

If you need help with Maintenance and Troubleshooting, please get in touch with

the WAZER Customer Support Team. Visit www.wazer.com/resources or email us

at [email protected].

Содержание WAZER Main Unit






































































Результаты поиска

Содержание WAZER Main Unit

Отзывы:

Бренды по названию

Популярные бренды

Wazer WAZER Main Unit, Руководство пользователя

Результаты поиска

Содержание WAZER Main Unit

Отзывы:

Бренды по названию

Популярные бренды