Wazer WAZER Main Unit страница 69 Скачать руководство пользователя

Страница: 69 / 69

claimant. Replacement parts and their shipping

and duties that are required due to user misuse or

user error in diagnosis or fixing are not covered by

the warranty.

a. If your original shipping address is located in the

Continental United States, WAZER will cover the

cost of the above shipping.

b. If your original shipping address is located in the

Continental United States, WAZER will cover the

cost of the above shipping.

7. If you are asked to send back some or all of the

Product to WAZER in order to fulfill your claim, the

following requirements will apply:

a. If your original shipping address is located in the

Continental United States, WAZER will cover the

cost of the above shipping.

b. A Return Authorization Label will be provided

to you, which must be included in the return

package.

c. For purchasers in the Continental United States,

WAZER will provide prepaid shipping labels.

d. For purchasers outside the Continental United

States, you will be required to pay for the return

shipping.

8. WAZER reserves the right to change the method

by which WAZER may provide warranty service

to you, and your Product’s eligibility to receive a

particular method of service. Service options, parts

availability, and response times may vary according

to location.

Voiding Your Warranty

The Warranty is Void if:

•

The Product is used outside of the country of the

initial purchaser’s shipping address.

•

Any WAZER serial number has been removed or

defaced.

•

Any disassembly or reassembly by anyone other than

WAZER representatives occurs, other than do-it-

yourself assembly instructions outlined in the User

Manual or in other official WAZER publications, or

instructed by a WAZER representative.

Firmware, G-Code/CAM

Software.

Critical machine functionalities are built into the

firmware that prevents the machine from damaging

itself, your property, and/or harming the user. The

following modifications to WAZER firmware or the

loading of files onto WAZER will void the machine’s

warranty:

The use of non-WAZER released/approved firmware

and configuration files onto a WAZER machine.

The usage of any non-WAZER approved CAM software

to generate g-code or manually modified/created

g-code to run a WAZER. Approved g-code creation

solutions will be updated by WAZER. If there is any

uncertainty, please contact WAZER customer support.

Disclaimers

WAZER does not warrant your use of the Product will be

uninterrupted or error free.

•

WAZER does not warrant your use of the Product will

be uninterrupted or error free.

•

WAZER does not warrant that the results that may

be obtained from the use of the Product will be

accurate or reliable.

•

WAZER makes no claims about the safety or

effectiveness of any device made using the Product.

•

No warranty will apply after the expiration of the

Warranty Period.

•

EXCEPT AS PROVIDED IN THIS WARRANTY AND

TO THE MAXIMUM EXTENT PERMITTED BY LAW,

WAZER IS NOT RESPONSIBLE FOR DIRECT, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM ANY BREACH OF WARRANTY OR

CONDITION, UNDER ANY LEGAL THEORY, INCLUDING

BUT NOT LIMITED TO LOSS OF USE; LOSS OF

REVENUE; LOSS OF THE USE OF MONEY; LOSS OF

ANTICIPATED SAVINGS; LOSS OF BUSINESS; LOSS

OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF

REPUTATION; OR ANY INDIRECT OR CONSEQUENTIAL

LOSS OR DAMAGE HOWEVER CAUSED INCLUDING

THE REPLACEMENT OF EQUIPMENT AND PROPERTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT

APPLY TO YOU. PUNITIVE, EXEMPLARY, OR MULTIPLE

DAMAGES MAY NOT BE RECOVERED UNLESS

APPLICABLE LAW PROHIBITS THEIR DISCLAIMER.

General

No WAZER reseller, agent, or employee is authorized

to make any modification, extension, or addition

to this Warranty. If any term is held to be illegal or

unenforceable, the legality or enforceability of the

remaining terms shall not be affected or impaired. This

Warranty is governed by and construed under the laws

of the State of Delaware. WAZER or its successor in title

is the warranter under this Warranty.

rant

y |

TION 9

130

Содержание WAZER Main Unit






































































Результаты поиска

Содержание WAZER Main Unit

Отзывы:

Похожие инструкции для WAZER Main Unit

Бренды по названию

Популярные бренды

Wazer WAZER Main Unit, Руководство пользователя

Результаты поиска

Содержание WAZER Main Unit

Отзывы:

Похожие инструкции для WAZER Main Unit

Бренды по названию

Популярные бренды