Unpacking
Estimated Time: 30 minutes
Requires two people
WAZER arrives in a Crate. Within this crate you will find a variety of other boxes. These boxes will
contain all the components needed to run WAZER.
Before attempting to uncrate WAZER, please be sure to have:
•
Two people capable of lifting 60lbs (27kg) each
•
Box cutter or scissor
•
Cart or dolly
•
Adjustable wrench
•
Large bucket
VIDEO
RECOMMENDED: If you have a cart or dolly it is highly suggested
you use it to move the individual boxes.
Uncrating
Please follow these instructions to properly uncrate your WAZER:
1. Inspect your Crate and take pictures of any damage to the exterior.
2. Cut the straps that wrap the Crate and remove the top to the box.
3. Take the crate quarter panel out, and then tri-fold panel.
Moving the WAZER box through some environments (i.e. tight corners, narrow doors) may not be
possible. In this case, skip to WAZER Unboxing. Note that you will need to take extra care not to
damage WAZER when moving the machine to its final location.
4.
WAZER Stand Leg Accessory
(if included)
:
Remove the WAZER Stand Leg Accessory
box.
5.
Abrasive
(if included)
:
Remove the Abrasive
buckets.
6.
Pump Box
(Two-person lift)
:
With one person on each side
of the box, firmly grip the underside of
the box or packing straps, then orient the
Pump Box right side up and place it near
the intended location of WAZER.
7.
WAZER
(Two-person lift):
With one person on each
side of the box, firmly grip the underside
of the box or its packing straps, then place
the WAZER box near the intended location
of WAZER.
a.
Be sure to observe proper orientation of
this box. Never place it on its sides or invert
it.
b. Do not place the WAZER box on any
surface that cannot bear significant
weight.
Set
tin
g Up W
AZER |
SE
C
TION 4
28
29
