Waters Xevo TQD, Обзор и руководство по обслуживанию

Страница: 121 / 250

Cleaning the extraction cone
March 14, 2014, 715004387 Rev. B 121
Removing the extraction cone from the ion block
Required materials
• Chemical-resistant, powder-free gloves
• Combined 2.5-mm Allen wrench and cone extraction tool
To remove the extraction cone from the ion block:
1. On the rear of the ion block, use the combined 2.5-mm Allen wrench and
cone extraction tool to loosen the captive screws securing the 2 PEEK
extraction cone retainer clips, and then rotate the retainer clips clear of
the extraction cone.
Warning:
To avoid personal contamination with biohazards or
toxic materials, and to avoid spreading contamination to
uncontaminated surfaces, wear clean, chemical-resistant,
powder-free gloves when working with the ion block components.
Securing screw Extraction cone
Retainer clip
rotated clear of the
extraction cone
Extraction cone handle insulator