Timewave PK-900 Скачать руководство пользователя страница 88

Страница: 88 / 392

5.2 Local Logon

If you are using PC PACKRATT or some other host mode program, follow

the instructions for the program. If you are using a terminal or

terminal program the following sections apply.

Type MDCHECK to verify that you have local control of the MailDrop.

You must not be connected or linked to any other stations to be able

to do this.

Once logged on to your MailDrop from your local keyboard, you are

shown the MailDrop prompt as though you were the calling station:

[AEA PK-900] 17396 free (B,E,K,L,R,S) >

You can now EDIT, KILL, LIST, READ or SEND messages.

The number "17396 free" is the RAM available for MailDrop messages.

While you're "logged on" to your MailDrop, a connect request from

another station will cause the PK-900 to send the "BUSY" frame. In

AMTOR, the PK-900 simply ignores ARQ link requests while you are

logged on to your MailDrop. When you are finished using the MailDrop,

type "B" (BYE) to "log off". This returns the PK-900 to normal

operation and makes your MailDrop available to other stations.

In Packet mode, you must leave the MAILDROP command ON if you wish to

make it available for others. No other stations can reach your

MailDrop unless the MAILDROP command is turned ON. In AMTOR, TMAIL

must be ON.

You have full control of your PK-900 while the MAILDROP is ON. You

can connect to others and carry on normal QSOs using the call sign in

MYCALL provided you have entered a separate MYMAIL MailDrop callsign.

5.2.1 Monitor MailDrop Operation

Set MDMON to ON to monitor other stations' use of your MailDrop. Set

MDMON OFF (default) to cancel MailDrop monitoring. User bit 13 allows

MailDrop connect and status messages to be disabled as well. See the

UBIT command in the command summary for specifics.

The MDMON command permits you to monitor a station's activity on your

MailDrop showing you both sides of the QSO. Packet headers are not

shown while a caller is connected to your MailDrop. When a caller is

connected to the MailDrop, MCON determines what packets are monitored.

When your MailDrop is idle, MONITOR determines what packets are seen.

5.2.2 Caller Prompts

MTEXT is the MailDrop connect-message prompt sent to a packet station

connecting to the MailDrop if MMSG is ON. The default message is:

"Welcome to my AEA PK-900 maildrop.

Type H for help."

MDPROMPT is the Message prompt sent to a station by the MailDrop.

This prompt is given to a station sending a message. You can enter

1/93 5-2

Содержание PK-900









































































































































































































































































































































































































Результаты поиска

Содержание PK-900

Отзывы:

Похожие инструкции для PK-900

Бренды по названию

Популярные бренды

Timewave PK-900, Руководство по эксплуатации

Результаты поиска

Содержание PK-900

Отзывы:

Похожие инструкции для PK-900

Бренды по названию

Популярные бренды