Timewave PK-900 Скачать руководство пользователя страница 348

Страница: 348 / 392

PK-900 Gateway Option Supplement

In PTCONN, this command accomplishes the same thing as sending the PTOVER

character. The OVER command is useful in Host mode when sending transparent

data (CONMODE TRANS). To change from ISS to IRS, you would normally send the

PTOVER character, but in Transparent mode, the character would be sent as data

and would not change the link direction. The OVER command changes the direc-

tion without the need to change CONMODE to CONV first.

In AMTOR ARQ, this command inserts “+?” into the data stream being sent. If

EAS is ON, the “+?” is echoed to the terminal.

PTList

Immediate Command

Mode: PACTOR

Host: PN

Parameters:

In PACTOR Listen (and AMTOR LISTEN) modes, monitored connect attempts are now

displayed like this:

>W1AW <C>

The callsigns are shown one per line and are meant to resemble the way the TNC

monitors connect frames in the packet mode. Since neither mode supports iden-

tification within the calling blocks, no source callsign can be shown.

PTRound ON|OFF

Default: OFF

Mode: PACTOR

Host: Pr

Parameters:

OFF

Returns the TNC to the PACTOR-Standby mode after a PTSEND transmission.

Returns the TNC to the PACTOR-Listen mode after a PTSEND transmission.

PTROUND facilitates PACTOR “roundtable” conversations with multiple stations

using the PTSEND (FEC) mode as opposed to the Connected mode.

As the unit finishes sending a PTSEND transmission, it normally returns to

PACTOR Standby mode. If PTROUND is ON, the unit returns to PTLIST instead in

order to copy another station’s PACTOR transmission. PTROUND has no effect

when PACTOR connection ends—the unit will always return to PACTOR Standby.

REINIT

Immediate Command

Mode: All

Host: RI

This is an immediate command that you can invoke to get out of trouble caused

by setting a lot of commands—especially timing parameters—to strange values.

REINIT can be thought of as being halfway between RESTART and RESET. REINIT

re-initializes most of the commands to their default settings, then does a

Содержание PK-900









































































































































































































































































































































































































Результаты поиска

Содержание PK-900

Отзывы:

Timewave PK-900, Руководство по эксплуатации, Страница: 348 / 392

Результаты поиска

Содержание PK-900

Отзывы: