manualshive.com logo in svg

Timewave PK-900, Руководство по эксплуатации


Поделиться
Скачать
background image

 

                               PK-900 COMMAND LIST 

 

  COMMAND      DEFAULT                      FUNCTION 

 

  3Rdparty     OFF                 Enables 3rd party MailDrop messages 

  5Bit         Immediate Command   Starts copying special 5-bit stations 

  6Bit         Immediate Command   Starts copying special 6-bit stations 

  8Bitconv     OFF                 Enables 8-bit data in packet/ASCII CONVERSE 

  AAb          (empty)             Sets the 0-24 character WRU Auto-answerback 

  ABaud        110 bauds           Sets the ASCII baud rate 

  AChg         Immediate Command   Forces AMTOR and PACTOR ARQ Changeover 

  ACKprior     OFF/OFF             Enables priority acknowledgment in packet 

  ACRDisp      0                   Sets terminal output Screen width 

  ACRPack      ON                  Adds Carriage Returns to transmitted packets 

  ACRRtty      71                  Sets the RTTY/AMTOR Auto <CR> insert column 

  ADelay       4                   Sets AMTOR and PACTOR transmit delay, 10 ms. 

  AFilter      OFF                 Enables All-mode receive character filter 

  ALFDisp      ON                  Sends <LF> after <CR> to terminal 

  ALFPack      OFF                 Sends <LF> after <CR> in transmitted packets 

  ALFRtty      ON                  Sends <LF> after <CR> in transmitted RTTY 

  AList        Immediate Command   Starts the AMTOR ARQ 'Listen' mode 

  AMTOR        Immediate Command   Starts the AMTOR mode in ARQ standby 

  ANalog       Immediate Command   Starts the Analog mode 

  ANSample     2000                Sets the number of Analog mode samples 

  ARq          (SELCAL)            Starts the AMTOR ARQ call with SELCAL 

  ARQE         Immediate Command   Starts the ARQ-E receive mode 

  ARQTmo       60                  Sets the AMTOR/PACTOR ARQ call time-out 

  ARQTOL       3                   Sets bit jitter tolerance in ARQ AMTOR 

  AScii        Immediate Command   Starts the ASCII RTTY mode  

  ASPect       2 (576)             Sets the received aspect ratio in FAX 

  AUdelay      2/2 (20 msec.)      Sets delay before audio is applied after PTT 

  AUTOBaud     OFF                 Enables Autobaud routine at every power-on 

  AWlen        7                   Sets ASCII word length to RS-232 terminal 

  Ax25l2v2     ON/ON               Sets AX.25 Version 2.0 packet protocol 

  AXDelay      0/0 (zero)          Sets packet Repeater key-up delay (X10 ms) 

  AXHang       0/0 (zero)          Sets packet Repeater hang time (X10 ms) 

  BARgraph     0                   Sets the type of tuning bar graph display 

  BAudot       Immediate Command   Starts the Baudot RTTY mode 

  BBSmsgs      OFF                 Enables TAPR style status messages 

  Beacon       EVERY 0/EVERY 0     Sets the packet beacon timing (X10 seconds) 

  BItinv       $00                 Sets the XOR value to copy bit inverted RTTY 

  BKondel      ON                  Sends <BS> <SP> <BS> for DELETE char. 

  BRight       50                  Sets the brightness of the LCD backlight 

  BText        (Empty)             Sets the 120-byte packet BEACON message text 

  CALibrat     Immediate Command   Starts PK-900 AFSK tone calibrate mode 

  CANline      $18 <CTRL-X>        Sets the LINE DELETE character for editing 

  CANPac       $19 <CTRL-Y>        Sets the PACKET DELETE character for editing 

  CASedisp     0 (as is)           Sets the display case (as is/lower/UPPER) 

  CBell        OFF                 Enables packet and PACTOR 'Connect' bell 

  CCITT        ON                  (Use the CODE COMMAND instead) 

  CFrom        all/all             Sets the Connect request/accept list 

  CHCall       OFF                 Shows call sign after packet channel ID 

  CHDouble     OFF                 Shows CHSWITCH character twice 

  CHeck        30/30               Sets Idle packet link time-out (X10 seconds) 

  CHSwitch     $00                 Sets the channel-select character 

 

 

 

3/93                                    1 

Содержание PK-900









































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PK-900

Y-Solar Smart-MPPT Li Series User Manual preview
Smart-MPPT Li Series
Бренд: Y-Solar Страницы: 6
IBM 3746-900 Installation Manual preview
3746-900
Бренд: IBM Страницы: 276
IBM 4769 Installation Manual preview
4769
Бренд: IBM Страницы: 32
IBM 3745 Series Connection And Integration Manual preview
3745 Series
Бренд: IBM Страницы: 157
DigiPower IPP-S Series Installation Manual preview
IPP-S Series
Бренд: DigiPower Страницы: 27
bihl+Wiedemann BW3489 Installation Instructions Manual preview
BW3489
Бренд: bihl+Wiedemann Страницы: 16
Trane Tracer CH.530 RLC-SVU01B-E4 Owner'S Manual preview
Tracer CH.530 RLC-SVU01B-E4
Бренд: Trane Страницы: 60
knorr-baby PIQUETTO Manual preview
PIQUETTO
Бренд: knorr-baby Страницы: 44
ICP DAS USA M-7067D Quick Start Manual preview
M-7067D
Бренд: ICP DAS USA Страницы: 6
Harmonic Drive RSF B mini Series Manual preview
RSF B mini Series
Бренд: Harmonic Drive Страницы: 33
ENTRYPASS EP.N5150 Wiring Manual preview
EP.N5150
Бренд: ENTRYPASS Страницы: 42
Colorbeam ORBIT TP User Manual preview
ORBIT TP
Бренд: Colorbeam Страницы: 12
Kramer FC-21ETH User Manual preview
FC-21ETH
Бренд: Kramer Страницы: 60
PALI bora SPEED Instructions Manual preview
bora SPEED
Бренд: PALI Страницы: 12
H3C PSR360-56A User Manual preview
PSR360-56A
Бренд: H3C Страницы: 8
AzureWave AW-CM195NF User Manual preview
AW-CM195NF
Бренд: AzureWave Страницы: 27
Toho Electronics TTM-339 Operation Manual preview
TTM-339
Бренд: Toho Electronics Страницы: 32
MSA AutoMaXX Series Operating Manual preview
AutoMaXX Series
Бренд: MSA Страницы: 22

Бренды по названию

Популярные бренды

Загрузить еще бренды