manualshive.com logo in svg

Timewave PK-900, Руководство по эксплуатации, Страница: 166 / 392

Поделиться
Скачать
Timewave PK-900 Скачать руководство пользователя страница 166

 

11.7.3    Operating PACTOR with Other Modem frequencies and Shifts 

 

          All PACTOR operation uses 200 Hz shift FSK modems.  Modem 4 (default)  

          is therefore the best choice for ARQ or unproto PACTOR use.  The  

          PK-900 allows other modems to be used in PACTOR should the need arise.   

          The following other modems may be selected with the MODEM command. 

 

          Radio Port 1 Modems    

 

                1: FSK 45 bps 170: 2125/2295  (not recommended) 

                2: FSK 100 bps 170: 2125/2295 

                3: FSK 45 bps 200: 2110/2310  (not recommended) 

                4: FSK 100 bps 200: 2110/2310 (default modem RECOMMENDED) 

                5: FSK 100 bps 425: 2125/2550 

                6: FSK 100 bps 850: 2125/2975 

                7: FSK 100 bps 850: 1275/2125 

                9: FSK 2400 bps 800: 1300/2100 

               10: FSK 300 bps 200: 2110/2310 

               11: FSK 1200 bps 1000: 1200/2200 

 

11.7.4    Automatic Speed Change 

             

          If the command PT200 is set on, the linked PACTOR mode will 

          automatically change the transmitted data rate from 100 bps to 200 bps  

          if a certain number of error-free 100 bps packets are received in a  

          row. If the error rate at 200 bps is excessive, the data rate will 

          automatically revert to 100 bps.  There may be some propagation 

          conditions that will cause the system to vacillate between the two  

          data rates.  This may be prevented by setting PT200 to OFF, which will 

          force 100 bps operation.  See the UCMD command to control these  

          thresholds. 

 

11.7.5    Echoing Transmitted Characters As Sent (EAS) 

 

          EAS (Echo As Sent) operates the same as in ARQ AMTOR.  If EAS is on,  

          you will see characters echoed to your screen only the first time your 

          PK-900 sends them.  If the data is not acknowledged by the receiving 

          station and is re-transmitted, the characters are not echoed again. 

          With EAS OFF, characters are echoed to your screen as you type them.  

          With EAS ON: 

 

          o    If the data scrolls across your monitor at an even rate, you can  

               assume that you have a good ARQ link. 

 

          o    If the data hesitates or scrolls in "jerky" intermittent fashion,  

               that's generally a sign that the radio link is not very good. 

 

          o    If the characters stop appearing on your monitor, the link is  

               failing or has failed.  The Status display will tell you this 

               by showing ERROR or REQUEST nearly continuously. 

 

 

 

 

 

 

 

 

3/93                                   11-10 

Содержание PK-900









































































































































































































































































































































































































Отзывы:

Нет отзывов