manualshive.com logo in svg

Timewave PK-900, Руководство по эксплуатации, Страница: 334 / 392

Поделиться
Скачать
Timewave PK-900 Скачать руководство пользователя страница 334

PK-900 Gateway Option Supplement

10

L(isten)

Your Gateway is placed in PACTOR-Listen mode. If the 

ARXTOR

command is 

ON

, it will also monitor AMTOR FEC and ARQ. If in

doubt, use the 

PORT 

command to see which mode is being copied.

S(end)

The Gateway is placed in 

PTSEND

. Transmission ends when the user

sends “=”.

AMTOR (in) / Packet (out)

With 

XGATEWAY

 

OFF

, your TNC accepts AMTOR calls to your 

MYSELCAL

 as normal

AMTOR link-ups. With 

XGATEWAY

 

ON

, an AMTOR call to your 

MYSELCAL

 results in

access to the Gateway and packet on Port 2. (The callsign in 

MYGATE

 plays no part in

Gateway access from AMTOR.)

The AMTOR Maildrop has priority over the AMTOR gateway function—this means
that with 

TMAIL 

ON

, a station linking to your 

MYSELCAL

 can access your Maildrop.

However, the AMTOR user may type the new Maildrop command (“G”) to access the
Gateway—this surrenders the Maildrop to possible access by other users. There is no
command in the Gateway to return to the Maildrop.

If a packet user is already connected to your Gateway on Port 2 and has issued the

PORT 

1

 command to access AMTOR, the Gateway detects AMTOR calls only to the

packet user’s selcall, 

not your 

MYSELCAL

.

There is no 

PORT 

command for AMTOR access. The AMTOR user is given access to

packet on Port 2, automatically.

An AMTOR station linked to the Gateway command processor doesn’t need to send
“+?” to let the Gateway transmit. The Gateway detects the 

(RETURN)

 at the end of the

line, seizes the link to give the command response, and  then gives transmission back
to the user by ending the transmission with “+?”.

Once a packet connection has been established on Port 2, the Gateway seizes the
AMTOR link on Port 1 only when it has data to send to the user, it then gives the link
back by ending the transmission with “+?”.

Here is what an AMTOR user sees when connecting to your Gateway:

cmd:

ARQ NNML

+++ N7ML GATEWAY. TYPE ? FOR HELP.

+++ ENTER YOUR CALLSIGN: +?

KB7B

+++ You are on PORT 2, 1200 BPS PACKET. YOUR ID IS KB7B-15.

KB7B DE N7ML-7 GA+?

One way to establish a packet connection is to call a station directly:

J

18:30:56  P2 N7BCD

KB7B DE N7ML-7 GA+?

C N7BCD STAY

+++ CONNECTED TO N7BCD AT N7ML-7

Содержание PK-900









































































































































































































































































































































































































Отзывы:

Нет отзывов