Timewave PK-900 Скачать руководство пользователя страница 176

Страница: 176 / 392

11.10.5.1 Packet MailDrop Command Settings

First set up the packet side of the MailDrop (on Radio Port 2) by

setting MYCALL and MYMAIL. You may also want to enter a custom MTEXT

to let others know about the PACTOR feature. Be sure to set 3RDPARTY,

MDMON, MDPROMPT and MMSG as desired. If you will be reverse

forwarding to a full-service BBS, you must set HOMEBBS to the callsign

of that BBS. Do not forget to turn MAILDROP ON. As a test you should

connect to your own maildrop via a digipeater or network node to make

sure the radio link is working properly and the user prompts are what

you desire.

11.10.5.2 PACTOR MailDrop Command Settings

Once the Packet side is working properly, the PACTOR side of things on

Radio Port 1 must be configured. First be sure that MYCALL

is entered properly. You may want to customize the PACTOR

MailDrop prompt (MDPROMPT) or compose a message to ALL that tells

remote users about your system. Finally, remember to turn TMAIL ON

and enter the PACTOR mode of the PK-900 to start the PACTOR MailDrop.

11.10.5.3 Dual Port MailDrop Operation Notes

With the above parameters set, packet connections to the MYMAIL

callsign on Radio Port 2 will be sent to your MailDrop if you or a

remote PACTOR station is not using it. If you or any other station is

using your MailDrop, the remote user attempting the packet connection

will be sent a "*** Busy" message.

Similarly, a remote PACTOR station linking to you will be given access

to your MailDrop provided no one else is using it. If you or a remote

packet station is using your MailDrop, the PACTOR station may link to

you, but will not be given access to your MailDrop. For this reason,

you may wish to disable Radio Port 1 (by turning the RADIO parameter

to 0/2) when logging into your own MailDrop for maintenance. This

will prevent remote PACTOR stations from linking with you.

If you will be Reverse Forwarding messages into the Packet network, be

sure to check your MailDrop often for new messages. Remember that you

must use the Edit command in the MailDrop to select which messages

will be Reverse Forwarded.

Note: At this time unattended operation below 30 MHz is not legal

for US amateurs unless they hold a Special Temporary

Authorization (STA) from the FCC. Although this may soon

change, US amateurs must be sure to have control of their

HF transmitters when any device such as the PK-900

PACTOR/Packet MailDrop is in operation.

3/93 11-20

Содержание PK-900









































































































































































































































































































































































































Результаты поиска

Содержание PK-900

Отзывы:

Timewave PK-900, Руководство по эксплуатации, Страница: 176 / 392

Результаты поиска

Содержание PK-900

Отзывы: