Timewave PK-900 Скачать руководство пользователя страница 234

Страница: 234 / 392

________________________________________________________________________________

HPoll ON|OFF Default: ON

Mode: Host Host: HP

_________________________________ Parameters: __________________________________

ON - The HOST Mode program must poll the PK-900 for all data (default).

OFF - The HOST Mode program must accept data from the PK-900 at anytime.

________________________________________________________________________________

When HPOLL is ON (default) the HOST Mode program must poll the PK-900 (using

the <CTRL-A> O G G <CTRL-W>) for all data that might be available to be

displayed to the screen. When HPOLL is OFF, the HOST Mode program must be able

to accept any data from the PK-900 whenever it becomes available.

________________________________________________________________________________

Id Immediate Command

Mode: AMTOR/ASCII/Baudot/Packet Host: ID

________________________________________________________________________________

In AMTOR, the ID command acts like the RCVE command, only adding a Morse ID

before going back to receive. In ASCII and Baudot, the ID command causes a CW

ID to be sent much like an immediate version of the CWID character (CTRL-F).

Because the ID command is immediate, the message "Transmit Data Remaining" will

be displayed if any unsent data remains in the transmit buffer.

In Packet, ID is an immediate command that sends a special identification

packet. The ID command allows you to send a final identification packet when

you're taking your station off the air. HID must also be set ON. Be sure that

you select the correct Radio Port with the CHSWITCH command before issuing the

ID command. If you do not, the ID may be sent to the wrong Radio Port.

The identification consists of a UI-frame, with its data field containing your

MYALIAS (if any) and your MYCALL and the word "digipeater". The ID packet is

sent only if your PK-900 has digipeated any transmissions since the last

automatic identification.

________________________________________________________________________________

ILfpack ON|OFF Default: ON

Mode: Packet Host: IL

_________________________________ Parameters: __________________________________

ON - The PK-900 ignores line-feed characters received from the terminal.

OFF - The PK-900 transmits all line-feeds received from the terminal.

________________________________________________________________________________

The ILFPACK command permits you to control the way the PK-900 handles line-

feed characters received from your computer or terminal while in the Packet

mode.

1/93 A-56

Содержание PK-900









































































































































































































































































































































































































Результаты поиска

Содержание PK-900

Отзывы:

Похожие инструкции для PK-900

Бренды по названию

Популярные бренды

Timewave PK-900, Руководство по эксплуатации

Результаты поиска

Содержание PK-900

Отзывы:

Похожие инструкции для PK-900

Бренды по названию

Популярные бренды