manualshive.com logo in svg

Timewave PK-900, Руководство по эксплуатации, Страница: 285 / 392

Поделиться
Скачать
Timewave PK-900 Скачать руководство пользователя страница 285

________________________________________________________________________________ 

     WHYnot ON|OFF                                               Default: OFF 

     Mode: Packet                                                Host: WN 

_________________________________ Parameters: __________________________________ 

 

ON    -   The PK-900 generates a reason why received packets are not displayed. 

OFF   -   This function is disabled. 

________________________________________________________________________________ 

 

During packet operation, the PK-900 may receive many packets that are not  

displayed.  Turning WHYNOT on will cause the PK-900 to display a message  

explaining the reason the received packet was not displayed to the screen. 

The messages and their meanings are shown below: 

 

PASSALL:            The received packet frame had errors, and PASSALL was off,  

                    preventing the packet from being displayed to the screen. 

 

DCD Threshold:      The DCD LCD was off when the packet was received. 

 

MONITOR:            The MONITOR value was set too low to receive this frame. 

 

MCON:               MCON was set too low to receive this type of frame. 

 

MPROTO:             MPROTO was set to off, and the received packet was probably  

                    a NET/ROM or TCP/IP frame. 

 

MFROM/MTO:          The frame was blocked by the MFROM or MTO command. 

 

MBX:                The call sign of the sending station does not match the call  

                    sign setting in the MBX command. 

 

MBX Sequence:       The frame was received out of sequence, probably a retry. 

 

Frame too long:     Incoming packet frame longer than 330 bytes.  Probably a  

                    non-AX.25 frame. 

 

Frame too short:    Incoming packet frame shorter than 15 bytes.  Only seen if  

                    PASSALL ON.  Probably noise. 

 

RX overrun:         Another HDLC byte was received before we could read the  

                    previous one out of the HDLC chip. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/93                                   A-107 

Содержание PK-900









































































































































































































































































































































































































Отзывы:

Нет отзывов