manualshive.com logo in svg

Timewave PK-900, Руководство по эксплуатации, Страница: 358 / 392

Поделиться
Скачать
Timewave PK-900 Скачать руководство пользователя страница 358

66666 / TNC GPS Upgrade Addendum

Follow these steps to connect the APRS Adapter Cable to your equipment:

1.

Look at the APRS adapter cable. It looks like this:

Notice the words on the outside of the rectangle; they say TNC,  Computer, and GPS.
This is how the Cable should be connected.

2.

Connect the APRS Adapter Cable to the serial port on the TNC. The male side of the
Adapter Cable, labeled TNC, should be connected to the female serial port on the TNC.

3.

Connect an RS-232 (not included) to a free COM port on your computer. Connect the other
end of this cable to the RS-232 port marked “Computer” on the APRS Adapter Cable. (The
female side of the Adapter Cable, labeled ‘computer’, should be connected to a cable going
to the computer.)

4.

The cable that comes out the side of the APRS Adapter, labeled “GPS”, connects to the
NMEA-0183 port on your GPS receiver. You may need to buy an adaptor or connector to
match the connector on your GPS receiver.

The cable is now correctly connected to your equipment.

To set up the TNC for HSP operation, follow these steps:

1.

Connect your TNC to your computer, and to your GPS receiver using the Timewave
APRS Adapter Cable following the steps noted previously. Get the computer running
APRS software and the TNC running. Leave the GPS receiver off until you are ready to
receive the NMEA string.

2.

Press  ALT-S to bring up the setup menu.

3.

Now press G for GPS.

4.

Press  H for HSP.

5.

Now press ALT-S to save.

6.

Enter S for SAVE.

7.

Now follow the prompt from APRS to validate your APRS registration and save the mode
changes.

8.

Turn your GPS receiver on, and you are ready for APRS HSP operation.

9.

When finished using the TNC for APRS HSP operation, simply quit APRS. APRS may ask
you for some information before quitting. Answer the questions and when done, your TNC
will be ready for non-GPS activities.

APRS Dual Port Mode Set-up:

To set up APRS for dual mode operation, follow these steps:

1.

Connect your TNC to one of the COM ports on your computer. Get the TNC up and running
following the directions in Chapter 2 of this manual.

2.

Connect your GPS receiver to the other COM port on your computer. (You will need to
build your own cable for this connection. Since there are many types of GPS receivers, all

Содержание PK-900









































































































































































































































































































































































































Отзывы:

Нет отзывов