Thermo Scientific thermoscientific Vanquish Pumps C, Руководство по эксплуатации

Страница: 227 / 296

9 • Pump-Specific Information
Pumps C, Pumps F ( VC-Pxx, VF-Pxx)
Operating Manual Page 227
9.2.6.3 Monitoring the Liquid Level in the Waste Container
TIP When monitoring the liquid level in the waste container as described
in this section, the Chromeleon software calculates the liquid level. To
monitor the liquid level in real time, based on real physical
measurement, install the Vanquish Solvent Monitor. The solvent
monitor is available as an option (see
Optional Accessories ( } page 269) ).
For monitoring the liquid level in the waste container, note the
following:
• The waste liquids from the two pumps can be guided into the same
waste container or into different waste containers.
• Depending on the setup, you can monitor the liquid level in the
waste container for the dual pump as a whole or separately for each
pump.
Monitoring the Liquid Level for the Pump as a Whole
TIP It is possible to share the waste container even if the two pumps are
assigned to different instruments.
1. In the Instrument Configuration Manager, open the dialog box for
the dual pump.
2. On the Bottles tab page, select the Share Waste Bottles check box.
3. In the Chromeleon user interface, enter the information that is
required for monitoring (see Important Operating Parameters
( } page 97) ). Enter the information for both pumps.
Notice that the monitoring properties show the same values for both
pumps, for example, the
RemainTime property.
Monitoring the Liquid Level for Each Pump Separately
1. In the Instrument Configuration Manager, open the dialog box for
the dual pump.
2. On the Bottles tab page, clear the Share Waste Bottles check box.
3. In the Chromeleon user interface, enter the information that is
required for monitoring (see Important Operating Parameters
(
}
page 97) ). Enter the information for both pumps.