Thermo Scientific thermoscientific Vanquish Pumps C, Руководство по эксплуатации

Страница: 102 / 296

6 • Operation
Page 102 Pumps C, Pumps F ( VC-Pxx, VF-Pxx)
Operating Manual
Parameter Description
Seal washing The seal wash system is enabled and cannot be
disabled. As a standard, the pump performs a seal
wash in the following situations:
• Once per hour
• Each time the pump is turned on
If required, you can start an additional seal wash cycle
or stop a running cycle:
• If the seal wash pump is in Idle mode, select Active
to start a wash cycle.
• If the seal wash pump is in Active mode, select Idle
to stop a running wash cycle.
You can disable the drop counter functionality by
setting
Rear Seal Wash Monitoring to Disabled . Note
that disabling drop detection will not disable the seal
wash system. However, messages relating to the seal
wash system (for example, when the system has run
out of wash liquid) or piston seal leakage will no
longer alert you in the user interface.
Synchronization of the
injection time with the
pump strokes Relevant for quaternary pump and dual pump only
Synchronizing the injection time with the pump
strokes enhances the retention time precision. For
details, see
Synchronizing the Injection Time with the
Pump Strokes (
}
page 224) .