Tennant 6200E, Руководство по обслуживанию

Страница: 11 / 222

GENERAL INFORMATION
1-9 6200E 330415 (12--01)
Interval Key Description Procedure
Lubricant/
Fluid
No. of
Service
Points
100 Hours 12
Hopper dust filter Change for damage, clean or
replace
-- 1
13 Hydraulic reservoir Check fluid level HYDO 1
6 Tires Check for damage -- 3
1 Hopper seals Check for damage or wear -- 6
1 Hopper filter seals Check for damage or wear -- 2
12 Vacuum seal Check for damage or wear -- 1
2 Large debris trap skirt Check for damage or wear -- 1
7 Steering castor pivot
bearing
Lubricate and check for wear SPL 1
11 Vacuum fan belt Check tension and wear -- 1
9 Main brush belt Check for wear -- 1
200 Hours 5 Brakes Check and adjust travel -- 1
4 Steering gear chain Lubricate EO 1
8 Side brush(es) guard Check for damage or wear -- 1 (2)
3 Battery terminals and
cables
H
Check and clean -- 12
800 Hours 13 Hydraulic fluid reservoir Change hydraulic fluid HYDO 1
13 Hydraulic hoses Check for wear and damage -- 2
7 Propelling motor Check carbon brushes -- 1
6 Rear wheels
H
Check rear wheel axle torque -- 1
15 Main brush motor Check carbon brushes -- 1
LUBRICANT/FLUID
DW Distilled water . . . .
EO SAE 30 Engine oil . . . .
HYDO Tennant or approved hydraulic fluid .
SPL Special lubricant, Lubriplate EMB grease (TENNANT part no. 01433--1) . . .
NOTE: Also check procedures indicated (
H
) after the first 50 hours of operation.
NOTE: More frequent intervals may be required in extremely dusty conditions.