Tennant 6200E, Руководство по обслуживанию, Страница: 209 / 222

HYDRAULICS
5-5
6200E 330415 (6--99)
The higher temperature fluid has a higher
viscosity and should not be used at the lower
temperatures. Damage to the hydraulic pumps
may occur because of improper lubrication.
The lower temperature fluid is a thinner fluid for
colder temperatures.
If a locally available hydraulic fluid is used, make
sure the specifications match Tennant hydraulic
fluid specifications. Using substitute fluids can
cause premature failure of hydraulic components.
ATTENTION! Hydraulic components
depend on system hydraulic fluid for
internal lubrication. Malfunctions,
accelerated wear, and damage will result
if dirt or other contaminants enter the
hydraulic system.
HYDRAULIC HOSES
Check the hydraulic hoses after every 800 hours
of operation for wear or damage.
Fluid escaping at high pressure from a very small
hole can be almost invisible, and can cause
serious injuries.
See a doctor at once if injury results from
escaping hydraulic fluid. Serious infection or
reaction can develop if proper medical treatment
is not given immediately.
FOR SAFETY: When servicing machine,
use cardboard to locate leaking
hydraulic fluid under pressure.
If you discover a fluid leak, contact your mechanic
or supervisor.
The hydraulic reservoir on the model 6200E is
located on the bottom of the electro/hydraulic unit.
00002