Tennant 6200E, Руководство по обслуживанию, Страница: 105 / 222

SWEEPING
3-33 6200E 330415 (12--01)
LARGE DEBRIS TRAP SKIRT
The large debris trap skirt is located along the
front of the main brush. This skirt is raised and
lowered by the large debris trap pedal, allowing
larger debris to be trapped and swept up into the
hopper.
This skirt should be adjusted so it touches the
floor and is curled back, toward the main brush
(curl back should be 3/4 inch =/-- 1/8 inch).
Sweeping performance will be adversely affected
if this skirt does not contact the floor.
Check the skirt for wear or damage after every
100 hours of operation.
HOPPER SEALS
The hopper seals are located around the edge of
the opening between the main brush and the
hopper. The hopper rests against the seals when
the hopper is in the closed position.
Check the seals for wear or damage after every
100 hours of operation.
WARNING: Raised hopper may fall.
Engage hopper support bar.