Tennant 6200E, Руководство по обслуживанию, Страница: 77 / 222

SWEEPING
3-5 6200E 330415 (6--99)
HOPPER DUST FILTER
The Instant Access
t
hopper filter filters the air
pulled up from the hopper. The dust filter is
equipped with a shaker to remove the
accumulated dust particles. The dust filter shaker
is operated by the main brush, vacuum and filter
shaker switch.
Shake the dust filter before emptying the hopper
and at the end of every work shift. Check and
clean or replace the dust filter after every 100
hours of operation.
To clean the Instant Access
t
filter, use one of the
following methods:
D
SHAKING -- Press and hold the main brush,
vacuum and filter shaker switch to the Filter
shaker position.
D
TAPPING -- Remove the filter and tap the
filter gently on a flat surface with the dirty
side down. Do not damage the edges of the
filter element and seals, or the filter will not
seat properly in the filter frame.
D
AIR -- Blow air through the dust filter,
opposite the direction of the arrows. This
may be done with the dust filter in the
machine. Always wear eye protection when
using compressed air.
FOR SAFETY: When servicing machine,
wear eye and ear protection if using
pressurized air or water.
D
WATER -- Soak the dust filter in a water and
mild detergent solution. Rinse the dust filter
until it is clean. Air dry the wet dust filter; do
not use compressed air to dry a wet filter.
NOTE: Be sure the dust filter is completely dry
before reinstalling it in the machine.