manualshive.com logo in svg
background image

QUICKSTART

5.964-044.0 01/11

Warning

These are only brief instructions! Please read and comply with these instructions prior to using or servicing your 
appliance.

The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers 
for the operator and other persons.

Start up

1

A

B

C

A Tilt the seat towards the front.
B Check if the battery plug is connected to the 

appliance.

C Fold the seat backwards.

2

A

B

C

A Sit on the driver's seat.
B Set main switch to “1”.
C Check battery status.

Note

The device is equipped with a safety mechanism 
to prevent total discharge, i.e. when the permissi-
ble minimum capacity is reached, then the 
machine can only be driven and existing lamps 
can be switched on. In such a case, the battery 
monitoring symbol on the control console glows 
red.

„

Drive the machine directly to the charging 
station; avoid any steep gradients in the proc-
ess.

3

A

D

B

E

C

F

A Pull seat adjustment lever outwards.
B Slide seat, release lever and lock in place.
C Adjust the seat springs.
D Adjust the seat back.
E Set up the lumbar support.
F Loosen the wing nut to adjust the steering 

wheel. 
Position the steering wheel.
Tighten the wing nuts.

BR/BD 100/250

Содержание BR 100/250









Отзывы: