QUICKSTART
5.964-044.0 01/11
6
A
Fault indication
A The display shows the existing faults at
intervals of 4 seconds (example:
Fault scrubbing
funktion H1/022
If the faults continue to be displayed on the
console even after 4 seconds, then proceed
as follows:
Bring the key switch to "0" (switch off the
machine).
Wait till the text on the display has disap-
peared.
Bring the key switch back to "1" (switch on the
machine). Carry out the troubleshooting
measures in the given sequence only if the
fault occurs again. At such times, always
bring the main switch to the "0" position and
ensure that the emergency-stop button is
depressed.
If the fault cannot be repaired, call customer
service and mention the fault code(s) (H1/
022 in the example).
7
A
Faults with display
A See operating instructions, chapter "Faults
with display".
Troubleshooting
