background image

QUICKSTART

5.964-044.0 01/11

4

A

B

Note

Fill up the fresh water tank completely before 
starting up the machine to ventilate the water 
supply system. 

Warning

Risk of damage. Only use the recommended 
detergents. With respect to different detergents 
the operator bears the increased risk regarding 
the operational safety and danger of accident.
Only use detergents that are free from solvents, 
hydrochloric acid and hydrofluoric acid.
Follow the safety instructions for using deter-
gents.

A Open the cover of the fresh water reservoir.

Fill fresh water (max. 60 °C) until 15 cm below 
the upper edge of the tank. 

B Pour in detergent.

Close the cover of the fresh water reservoir.

Operation

1

A

B

Turning on the Appliance

Danger

Danger of accident. The immobilizing brake must 
always be checked first on an even surface 
before starting the machine.

A Sit on the driver's seat.
B Set main switch to “1”.

2

A

B

E

C

D

Drive the machine

A Set programme switch to step 1 (driving).
B Drive forward

Set the drive direction using the drive 
direction button at the operator console. 

C Reverse drive

Set the drive direction using the drive 
direction button at the operator console. 

D Determine the driving speed by pressing the 

drive pedal. 

E Stop the machine: Release driving pedal; 

press brake, if necessary. 

Start up

Содержание BR 100/250









Отзывы: