Technolas Victus, Руководство пользователя

Страница: 135 / 207

3.
Select the treatment you want to perform ( Ä Chapter 8.4.5 ‘Selecting treat‐
ments for execution’ on page 8 - 27 ).
n
To view the respective procedure parameters, check the parameters in
the relevant ‘Treatment summary’ screen.
Click
‘Back’ to open the associated ‘Treatment planning’ screen where
you can make necessary changes in the relevant parameter's dialog
boxes.
n
If the treatment is not already recorded in the database, create a new
treatment for this patient (
Ä Chapter 8.4.6 ‘Creating treatments’
on page 8 - 28 ).
It is not possible to select a treatment that has already been executed. If you
want to perform a similar treatment on the second eye, this treatment has to be
defined separately.
L
WARNING! Danger of injury due to incorrect parameters!
If parameters are illogical and not within the recommended range, the treat‐
ment results may differ from the desired outcome, which may cause severe
patient injuries.
– Always enter and verify all parameters very carefully.
For detailed information about the relevant procedure parameter values refer to the
‘Addendum to the user manual
"
VICTUS Femtosecond Laser Platform, SW V3.3
SP02
"
(English)’ (document no. ADD-100011422 )!
4.
Before starting a treatment, ensure that all parameters are within the
recommended range.
5. Ask the patient to enter the operating room.
6.
If patients have their hair in a knot or a ponytail, ask the patient to loosen
their hair.
9.4.2 Positioning the patient on the patient bed
Depending on the headrest being used, position the patient on the patient bed as
described in the following subchapters.
TREATMENT
9
SKU: 70005780TPV * Version 6 * UM-100010770 GB
9 - 9
TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM
UM-100010770 / Version 6 / Page 135 of 207