manualshive.com logo in svg

Technolas Victus, Руководство пользователя


Поделиться
Скачать
background image

2.3 

Important safety considerations

Danger of injury due to user negligence!
Always double-check the following before treatment:
– Are you treating the right patient?
– Did you select the correct treatment?
– Was the correct eye selected?
– Does the entered data match the patient to be treated?
Failure to verify any of the above-mentioned aspects may result in serious

permanent patient injury.

Danger of injury for persons with cardiac pacemakers!
Negative influence on the pacemaker, such as electromagnetic interference,

could occur during laser operation.
– During laser operation, no person— medical personnel or patients—

with a cardiac pacemaker should be present in the treatment room.

Property damage due to improper stacking or locating of non-intended

devices next to the product!
The product is very sensitive. Improper stacking or locating of non-intended

devices next to the product may lead to equipment damage or influence

concerning EMC. If adjacent or stacked use is necessary, the product should

be observed to verify normal operation in the configuration in which it will

be used.
– Do not stack or locate any non-intended devices next to the product

during operation.

The 

medical electrical equipment

 implies special precautions regarding EMC and

needs to be installed and put into service according to the EMC information provided
in 

Ä

 Appendix A ‘EMC declaration’ on page 13 - 3.

The 

medical electrical equipment

 may be affected by portable and mobile radio fre‐

quency communication equipment.

2.4 

Responsible organization

The responsible organization can be, for example, a public hospital, a private

person (ophtalmologist), or a private clinic.
Education and training is included in the term 'use'.

n

The responsible organization must ensure that hazards of network coupling

of the device must be observed. Such hazards include, for example, virus pro‐

tection, data security, network protection by firewall systems, and ensuring

sufficient bandwidth.

n

System modifications and use in combination with other equipment is

limited to TPV-approved equipment. Otherwise, the responsible organization

is in charge of proper risk management.

L

 WARNING

L

 WARNING

L

 WARNING

SAFETY

2

SKU: 70005780TPV * Version 6 * UM-100010770 GB

 

2 - 3

 

 

TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM

 

UM-100010770 / Version 6 / Page 19 of 207

Содержание Victus
















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Victus

Laica SB2200 Instructions And Guarantee preview
SB2200
Бренд: Laica Страницы: 4
Nemco 9101 Installation And Operating Instructions Manual preview
9101
Бренд: Nemco Страницы: 13
Ecco 7950 Installation And Operation Instruction Manual preview
7950
Бренд: Ecco Страницы: 12
UMF Medical 5005 Service Manual preview
5005
Бренд: UMF Medical Страницы: 12
K&K M8700 Manual preview
M8700
Бренд: K&K Страницы: 8
ADVANCED HOME CARE Helios Manual preview
Helios
Бренд: ADVANCED HOME CARE Страницы: 16
XanLite EXPERT Quick Start Manual preview
EXPERT
Бренд: XanLite Страницы: 4
Haki 564 User Manual preview
564
Бренд: Haki Страницы: 24
Dakota Digital VHX-66F-BRO Installation preview
VHX-66F-BRO
Бренд: Dakota Digital Страницы: 5
Yetter 5000 SERIES Operator'S Manual preview
5000 SERIES
Бренд: Yetter Страницы: 24
Yetter 5000 SERIES Owner'S Manual & Parts List preview
5000 SERIES
Бренд: Yetter Страницы: 32
Qnergy PowerGen 5650 Series Installation & Commissioning preview
PowerGen 5650 Series
Бренд: Qnergy Страницы: 10
GE Voluson E8 Quick Manual preview
Voluson E8
Бренд: GE Страницы: 37
VanGaa Lighting VG-LB1083 User Manual preview
VG-LB1083
Бренд: VanGaa Lighting Страницы: 7
Garmin GPSMAP 7400 Series Installation Instructions Manual preview
GPSMAP 7400 Series
Бренд: Garmin Страницы: 8
Woods RB750-4 Operator'S Manual preview
RB750-4
Бренд: Woods Страницы: 54
NordicTrack NTRW39121-INT.0 User Manual preview
NTRW39121-INT.0
Бренд: NordicTrack Страницы: 28
Sukup U-Trough Power Sweep Owner'S Installation & Operations Manual preview
U-Trough Power Sweep
Бренд: Sukup Страницы: 44

Бренды по названию

Популярные бренды

Загрузить еще бренды