Technolas Victus, Руководство пользователя

Страница: 168 / 207

20. Click the ‘Accept’ button (Fig. 149).
21.
To change the pachymetry value in the ‘AK @ 45°’ OCT B scan image, per‐
form steps 19 to 21.
22.
To start the arcuate incisions procedure, press the
‘Start’
button. When the
green highlighted frame appears in the ‘Treatment’ screen, finally press the
‘Procedure’ footswitch. Remember to keep the footswitch pressed during
the whole procedure.
The ‘Procedure’ footswitch must be pressed from the start of the arcuate inci‐
sions procedure until the end of the corneal incisions procedure! If you release
the ‘Procedure’ footswitch, the treatment will pause. Press the footswitch
again to continue the treatment.
ð
An acoustic signal is emitted during the procedures.
The progress is displayed in the
‘Arcuate incisions’ progress bar.
23.
After the arcuate incisions procedure is finished, the corneal incisions pro‐
cedure starts automatically. The progress is displayed in the ‘Corneal
incisions’ progress bar.
24. When the complete treatment is finished, all progress bars are highlighted
blue, the information footer shows the message ‘Treatment completed’
(Fig. 150), the acoustic signal stops and the green highlighted frame disap‐
pears in the ‘Treatment’ screen.
Fig. 150: Cataract treatment completed
TREATMENT
9
SKU: 70005780TPV * Version 6 * UM-100010770 GB
9 - 42
TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM
UM-100010770 / Version 6 / Page 168 of 207