Technolas Victus Скачать руководство пользователя страница 38

Страница: 38 / 207

If you do not detect any damage of the outside packaging, but the product is

damaged on the inside and if you think that this damage has resulted from

improper transportation, inform your distributor and the delivery company

immediately and insist on an inspection of the product. Keep the packaging

material until all questions of the delivery agent and the insurance company have

been clarified.

3.3

Storage before installation

After delivery to your clinic, hospital or practice, note the following:

The individual parts of the shipment must be stored in a secure and dry place

before installation and initial use.

3.4

Unpacking

After delivery, the product must be unpacked and installed by an Authorized

Service Technician exclusively.

Hazards due to unauthorized unpacking!
Removal of the transport safety device in the wrong sequence may result in

damage.
– The product must only be unpacked by Authorized Service Technicians.
– The product must not be connected before Authorized Service Techni‐

cians have made sure that it is in proper working condition before initial

operation.

Technolas Perfect Vision GmbH does not assume any liability for any damage to

the product arising from unauthorized unpacking.

WARNING

TRANSPORT AND STORAGE

SKU: 70005780TPV * Version 6 * UM-100010770 GB

3 - 2

TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM

UM-100010770 / Version 6 / Page 38 of 207

Содержание Victus
















































































































































































































Результаты поиска

Содержание Victus

Отзывы:

Похожие инструкции для Victus

Бренды по названию

Популярные бренды

Technolas Victus, Руководство пользователя

Результаты поиска

Содержание Victus

Отзывы:

Похожие инструкции для Victus

Бренды по названию

Популярные бренды