Technolas Victus, Руководство пользователя

Страница: 107 / 207

– If you change the parameters for incision 1, the relevant parameters for incision 2
are changed simultaneousely.
– If you change the parameters for incision 2, it does not affect the parameters for
incision 1.
– Every parameter change of incision 1 and/or incision 2 updates the respective B
scan image automatically (Fig. 68).
Fig. 68: ‘Arcuate incisions’ dialog box
Parameters
Parameter dialog box Definition
‘Incision 1’ Perform a first arcuate incision.
‘Incision 2’ Perform a second arcuate incision.
‘Diameter [mm]:’ ( ‘Incision 1’ ) Double distance from the center to where the first cut will be
performed.
‘Diameter [mm]:’ ( ‘Incision 2’ ) Double distance from the center to where the second cut will
be performed.
‘Pachymetry [µm]:’ ( ‘Incision 1’ ) Thinnest pachymetry measured at the site of incision 1.
‘Pachymetry [µm]:’ ( ‘Incision 2’ ) Thinnest pachymetry measured at the site of incision 2.
‘Depth ratio [%]:’ ( ‘Incision 1’ ) Ratio of the incision 1 depth to the thinnest pachymetry meas‐
ured.
‘Depth ratio [%]:’ ( ‘Incision 2’ ) Ratio of the incision 2 depth to the thinnest pachymetry meas‐
ured.
‘Resulting depth [µm]:’ ( ‘Incision 1’ ) Absolute depth of the incision 1 given in microns.
‘Incision 1’ / ‘Incision 2’
dialog box
SOFTWARE
8
SKU: 70005780TPV * Version 6 * UM-100010770 GB
8 - 41
TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM
UM-100010770 / Version 6 / Page 107 of 207