Technolas Victus, Руководство пользователя

Страница: 185 / 207

9.
When the PKP procedure is finished, the ‘Penetrating keratoplasty’ pro‐
gress bar is highlighted blue, the information footer shows the message
‘Treatment completed’ (Fig. 168), the acoustic signal stops and the green
highlighted frame disappears in the ‘Treatment’ screen.
Fig. 168: PKP procedure completed
10.
Click the ‘Continue’ button (Fig. 168) to open the ‘Treatment result’ screen
that shows the procedure results and the number of remaining licenses.
ð
L
CAUTION! Danger of trauma due to lowering the patient bed
without having released the vacuum of the suction clip!
When the vacuum is activated, lowering the patient bed leads to
an abrupt loss of vacuum and causes pain to the patient.
– Do not lower the patient bed while the vacuum is activated and
the patient is docked.
11.
Do not remove the suction clip while the vacuum is activated.
12. Verify that the eye suction has been released after the procedure has been
executed.
ð
The ‘Eye suction’ status indicator of the suction clip turns gray .
When a treatment is completed and the ‘Eye suction’ status indicator
does not turn gray, you must manually pull off the suction reservoir from
the suction port at the laser system.
13. Disable the ‘PI suction’ in the software to deactivate the vacuum of the
spacer cone.
14.
Complete the PKP procedure ( Ä Chapter 9.4.6 ‘Completing a treatment’
on page 9 - 29 ).
TREATMENT
9
SKU: 70005780TPV * Version 6 * UM-100010770 GB
9 - 59
TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM
UM-100010770 / Version 6 / Page 185 of 207