SystemAir REPT10, Руководство по эксплуатации

Страница: 45 / 67

* IO option Add-on module type Z-Modul-B
|
8K
|
Group control
** Deviating factory setting for mode 2.03
|
9K
|
only 2.03 Heating function
|
- - - -
|
= display as long as no allocation has been carried
out
|
10K
|
only 2.03 Cooling function
9.9.2 Analog-Output “
A
”
A Function
The analog outputs 0 - 10 V can be allocated with various functions.
Terminals
“ A ” - “ GND ” = Analog Out (I
max
10 mA)
A min.
With the attitudes “ A min ” and “ A max ” the characteristic of the output voltage can be
adapted.
Setting range:
“ A min. ” = 0 - 5 V, “ A max. ” = 10 - 5 V
Factory setting: “ A min. ” = 0 V, “ A max. ” = 10 V
A max.
A Inverting
With the attitudes
“
A Inverting
”
the output voltage can inverted.
Factory setting: “ A Inverting ” = “ OFF ”
Function Description
OFF
without function
1A Constant v10 V (factory setting)
2A
Proportional the internal control of modulation with consideration “ Min. speed ” and “ Max.
speed ” setting.
•
for enable
“
OFF
”
it goes back to 0 V
•
for motor fault the output signal remains for a slave controller (
“ Master-Slave ”
combination).
3A
proportional input “ E1 ”
4A
proportional input “ E2 ”
5A Group control ( Controller Setup - second group)
6A Control output 2 increasing modulation at actual value > Set = cooling (only mode 2.03
temperature controller with additional functions).
7A
Control output 2 incresing modulation at actual value < Set (Heating) only mode 2.03 temper-
ature controller with additional functions).
A1 Function “ A min. ” and “ A max. ”
Analog
Out
5 V
10 V
Funktion
0 50 100 0 -100 %
A max: 10 – 5V
A min: 0 – 5V
16.03.2007
v_a1_funktion_amin_amax.vsd
A1 Function
|
3A
|
/
|
4A
|
5 V
10 V
Signal
0 1 2 3 4 5 6 7 8 9 10
10 9 8 7 6 5 4 3 2 1 0
0 2 4 6 8 10 12 14 16 18 20
20 18 16 14 12 10 8 6 4 2 0
4 5,6 7,2 8,8 10,4 12 13,6 15,2 16,8 18,4 20
20 18,4 16,8 15,2 13,6 12 10,4 8,8 7,2 5,6 4
0 – 10 V
10 – 0 V
0 – 20 mA
20 – 0 mA
4 – 20 mA
20 – 4 mA
-27 -16.8 -6.6 3.6 13.8 24 34,2 44.4 54.6 64.8 +75 TF.. (KTY)
16.03.2007
v_a1_funktion_3a_4a.vsd
Operating Instructions
REPT6 / REPT10
Programming
L-BAL-E081-GB 1237 Index 002 Part.-No. 00163316-GB
45/67