SystemAir REPT10, Руководство по эксплуатации

Страница: 27 / 67

9.2.6 For mode
2.03
Relay output for temperature monitoring
If the set value for the “ minimum alarm ” is not reached or the set value for the “ maximum alarm ” is
exceeded, a message is generated via the alarm symbol in the display. In addition, „ Lmt E1 min “ is
displayed alternately with the actual value for the minimum alarm and Lmt E1 max for the „ Maximum
alarm “ . An external message follows via the factory-assigned “ K1 ” relay. (IO Setup: K1 function =
|
2K
|
).
Alarm Minimum
Alarm Minimum
Setting range: OFF / -20.5...82.6 ° C
Factory setting: 0.0 ° C
Alarm Maximum
Alarm Maximum
Setting range: OFF / -20.5...82.6 ° C
Factory setting: 40.0 ° C
Lmt E1 min
Example for display if falling below setting “ Alarm Minimum ” alternating to the actual
value display.
Relay
“
K1
”
disengages (if not inverted).
Lmt E1 max.
Example for display if exceeding setting “ Alarm Maximum ” alternating to the actual
value display.
Relay
“ K1 ” disengages (if not inverted).
9.2.7 Menu for Temperature controller
2.01
...
2.05
Parameter Factory setting
User
Setting
Start
PIN input - - - - - - - - - - - - - - - - - - - -
Language GB GB GB GB GB
Reset OFF OFF OFF OFF OFF
Mode
2.01 2.02 2.03 2.04 2.05
Acontrol 1.14 1.14 1.14 1.14 1.14
Info
E1-E2 actual -2.4 ° C
Control value 30.0 ° C
E1 Actual 30.0 ° C 30.0 ° C 30.0 ° C 30.0 ° C 30.0 ° C
E2 Actual - - - - - - - - - - - - - - - 30.0 ° C 30.0 ° C
Setpoint1 20.0
°
C
(55.0 ° C)*
5.0
°
C
(55.0 ° C)*
20.0
°
C
(55.0 ° C)*
20.0
°
C
(55.0 ° C)*
0.0
°
C
(55.0 ° C)*
* (at active Sensor ““ MTG-
120V
”
)
Modulation
0.0 % 0.0 % 0.0 % 0.0 % 0.0 %
Msco
OFF OFF OFF OFF OFF
Setting
Setpoint1 20.0 ° C
(55.0 ° C)*
5.0 ° C
(55.0 ° C)*
20.0 ° C
(55.0 ° C)*
20.0 ° C
(55.0 ° C)*
0.0 ° C
(55.0 ° C)*
Setpoint2 - - - - - - - - - - - - - - - - - - - - - - - - -
Pband 5.0 K
(65.0)*
20.0 K
(65.0)*
5.0 K
(65.0)*
5.0 K
(65.0)*
5.0 K
(65.0)*
Min. Speed 0 % 0 % 0 % 0 % 0 %
Max. Speed 100 % 100 % 100 % 100 % 100 %
Manual mode OFF OFF OFF OFF OFF
2.01
Temperature control simple
Speed man. 100 % 100 % 100 % 100 % 100 %
Operating Instructions
REPT6 / REPT10
Programming
L-BAL-E081-GB 1237 Index 002 Part.-No. 00163316-GB
27/67