9.10
Limits
9.10.1
Menu overview
“
Limits
”
Limits
Menu group Limits
Parameter
Factory setting
User Setting
Level. Function
OFF
Level min.
- - - -
Level max.
- - - -
Level Delay
- - - -
Lmt E1 Function
OFF (1L*)
Lmt E1 min
- - - - (0.0
°
C*)
Lmt E1 max.
- - - - (40.0
°
C*)
Lmt E1 Hyst.
- - - - (1.0 K*)
Lmt E1 Del.
- - - - (2 sec*)
Lmt E2 Function
- - - - / OFF
Lmt E2 min.
- - - -
Lmt E2 max.
- - - -
Lmt E2 Hyst.
- - - -
Lmt E2 Del.
- - - -
Offset Function
OFF
Offset 1
- - - -
Offset 2
- - - -
Offset Hyst.
- - - -
Offset Del.
- - - - -
* Deviating factory setting for mode
2.03
|
- - - -
|
= display as long as no allocation has been carried out
9.10.2
Limit indication depending on modulation
Level. Function
Following functions can be allocated to the limit indication
OFF
without function
1L
Indication with the centralized fault of a programmed relay (IO allocation
Function
|
2K
|
).
Warning symbol in display,
“
AL
”
code in events memory.
2L
Is merely displayed in the events menu as message
“
msg
”
.
In the IO setup, a separate relay can be allocated independent of these settings.
Level min.
If the modulation exceeds the set
“
Level max
”
value, this is reported until the set value
“
Level min
”
has been undercut.
Setting range
“
Modulation min.
”
:
“
Min. Speed
”
-
“
Modulation max.
”
Setting range
“
Modulation max.
”
:
“
Modulation min.
”
-
“
Max. Speed
”
The indication is delayed by the time set in
“
Display delay
”
.
Level max.
Level Delay
Time delay exceeding
“
Level max.
”
up to indication by relay and alarm symbol.
Setting range: 0 - 120 sec.
Factory setting: 2 sec.
Operating Instructions
REPT6 / REPT10
Programming
L-BAL-E081-GB 1237 Index 002
Part.-No. 00163316-GB
55/67
