Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Руководство администратора

Страница: 771 / 861

770 Field descriptions
Cluster field descriptions
Watchlist window
You can select different security gateway processes to monitor at any time. For example; If you have a
deployment where the only purpose is to serve up Web pages and the HTTP proxy goes down, this
causes the entire cluster to signal the fault. The cluster status on the Cluster Member window displays
that the cluster node is down, and the message displayed is “Not all nodes are up (Process Failed).”
Associated tasks
The task that you can perform with this window is:
■
“Monitoring cluster processes” on page 516
Add Watched Process
This dialog box lets you add a watched process to the Watchlist window.
Associated tasks
The task that you can perform with this window is:
■
“Monitoring cluster processes” on page 516
Ping Groups window
You can configure ping groups to monitor any device on any network. For example, servers, switches,
hosts, routers, and so forth.
If the Ping group fails, the whole cluster goes down. You can see this in the Cluster Status page, which
will report: “Not all nodes are up” “Process Failed” for all nodes.
Associated tasks
The task that you can perform with this window is:
■
“Configuring ping groups for clusters” on page 517
Ping Groups Properties—General tab
Use the General tab to configure the ping process.
Table D-259 Watchlist window
Field Description
Available Shows a list of processes that are available to monitor.
Selected Shows a list of processes that are monitored.
Add New Process Adds a process that is not in the list.
Table D-260
Add Watched Process dialog box
Field Description
Enter new process to
watch The name of the new process being added to the Available process list.
The maximum length is 255 characters.