Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Руководство администратора

Страница: 184 / 861

184 Defining your security environment
About service groups
To create a service group
1 In the SGMI, in the left pane, under Assets, click Protocols .
2 In the right pane, on the Service Groups tab, click New .
3 In the Service Group Properties dialog box, on the General tab, do the following:
4 On the Protocols tab, to add protocols to the Selected list, click Add .
5 The Select Protocols dialog box displays the protocols you can add to the service group. You can
modify the list by changing the search method and specifying a value.
The default search method is All, which displays all protocols.
To shorten the list, do one of the following:
■
To display only protocols whose names contain a specific text string, in the Search drop-down
list, select
Contains, and then type the text string.
■
To display only protocols whose names begin with a specific text string, select Starts with ,
and then type the text string.
6 In the Network Protocol list that is returned by your search, select the desired protocols and then
do one of the following:
■
To add the selected protocols to the service group and close the dialog box, click OK .
■
To add the selected protocols to the service group without closing the dialog box, click Apply .
When you are done selecting protocols, click Close .
7 On the Protocols tab, to remove a protocol, highlight it in the Selected list and click Remove .
8 On the Additional Parameters tab, you can add additional parameters that apply to this service
group.
The syntax of these parameters must be exact. You should consult Symantec technical support
before you add additional parameters.
9 Optionally, on the Description tab, type a more detailed description than you typed in the Caption
text box.
Service Group Name Type a name for the service group.
Do not include spaces in the name.
Caption Type a brief description of the service group.