Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Руководство администратора

Страница: 27 / 861

27 Becoming familiar with the SGMI
Logging on to the SGMI
2
In the Security Alert dialog box, verify the temporary certificate that is generated by the appliance
and then click
Yes to accept it.
3 In the Warning-Security dialog box, verify the certificate, and then click Yes .
4 If a Hostname Mismatch dialog box is displayed, click Yes .
5 When a message in the browser window notifies you that the application has started, close the
window.
6 In the next Warning-Security dialog box, verify the certificate, and then click Yes .
7 If additional Hostname Mismatch dialog boxes are displayed, click Yes to close them.
8
In the Password Needed - Networking dialog box, do the following:
■
In the User name text box, type the user name for your account on the security gateway.
■
In the Password text box, type the password for your account on the security gateway.
■
Click Yes .
9 In the Warning - Security dialog box, click Yes .
10 In a final Warning - Security dialog box from Sun Microsystems, Inc., click Yes .
Related information
For further information related to this topic, see the following:
■
“Logging on to the SGMI from the desktop” on page 25
Avoiding hostname mismatches
When the security gateway is configured for the first time, a certificate is created for host.domain, the
default host name of the security gateway.
If all of the following are true, when you log on to the SGMI you receive a warning message that a host
name mismatch has occurred:
■
You log on using a URL
■
A domain name other than host.domain has been specified for the security gateway during setup
■
Your corporate DNS is not set up to resolve the URL to the host name
This message does not indicate a problem and can be accepted as part of the log on procedure.
Alternatively, you can configure your computer to avoid the display of the warning in the future.
Prerequisites:
Complete the following task before beginning this procedure:
■
“Logging on to the SGMI for the first time” on page 22
To avoid hostname mismatches:
1 Log on to the SGMI.
2 In the left pane, under System, click System Information .
3 In the right pane, view the system information and record the host name and domain name of the
security gateway.
The SSL certificate that secures your access to the security gateway uses the combination of these
names as the hostname of the security gateway.
4 On the File menu, click Log off .
5
From your desktop, open the etc/Hosts file.