Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Руководство администратора

Страница: 60 / 861

60 Becoming familiar with the SGMI
Working with configurations of objects
Save and activate changes
You can save and activate changes both from the toolbar and from menu options.
To save changes
1
Do one of the following:
■
On the toolbar, click Save .
■
On the File menu, click Save .
2 One of the following takes place:
■
If the configurations are correct, the green + mark or blue ball to the left of each object is
removed, indicating that the changes have been saved.
A status message “Changes pending” appears on the right side of the toolbar.
■
If there is an error in your configuration, an error message describing it is displayed.
Fix the mistake, and then click
Save again.
To activate changes
1 Do one of the following:
■
On the toolbar, click Activate .
■
On the System menu, click Activate.
2 If you have not saved changes, a Save Changes message box prompts you to save.
Do one of the following:
■
To activate changes that you have previously saved and any changes you have made
subsequently, click
Yes .
■
To activate only changes that you have previously saved, without activating your unsaved
changes, click
No .
3 In the Activate Changes Wizard welcome panel, click Next .
4 In the Revision Comment panel, in the Activation Comment text box, type a comment to identify
the changes that you made to the configuration.
This comment appears as the description of the active configuration in the Quick Status section on
the Home Page.
5 Click Next .
6 In the Activation panel, the Activation Progress indicator shows your changes being activated.
One of the following takes place:
■
If all of the configurations contain the required fields and have legal values, the wizard screen
message changes to Activation successful.
Click
Close .
■
If you have made an error or omitted a required field in a configuration, the wizard screen
reports Activation not successful, and a window opens at the bottom of the SGMI, showing a
validation report that describes your error.
Return to the invalid configuration and correct the problem. Then run the Activation wizard
again.
Related information
For further information related to this topic, see the following:
■
“Viewing Quick Status” on page 29
■
“Reverting changes” on page 61