Siemens SIPROTEC, Руководство пользователя

Страница: 8 / 776

Preface
SIPROTEC, 7SD5, Manual
C53000-G1176-C169-5, Release date 02.2011
8
Besides these, graphical symbols are used in accordance with IEC 60617-12 and IEC 60617-13 or similar.
Some of the most frequently used are listed below:
■
Analog input values
AND-gate operation of input values
OR-gate operation of input values
Exclusive OR gate (antivalence): output is active, if only
one
of the
inputs is active
Coincidence gate: output is active, if
both
inputs are active or inactive
at the same time
Dynamic inputs (edge-triggered) above with positive, below with nega-
tive edge
Formation of one analog output signal from a number of analog input
signals
Limit stage with setting address and parameter designator (name)
Timer (pickup delay T, example adjustable) with setting address and
parameter designator (name)
Timer (dropout delay T, example non-adjustable)
Dynamic triggered pulse timer T (monoflop)
Static memory (RS-flipflop) with setting input (S), resetting input (R),
output (Q) and inverted output (Q)