Schweitzer Engineering Laboratories SEL-700G Series, Инструкция по эксплуатации

Страница: 388 / 824

SET.12
of 68
SEL-700G Relay Instruction Manual Date Code 20170814
SEL-700G Settings Sheets
Group Settings (SET Command)
GND DIR PRIORITY (I, V, Q, IV, VI, QV, VQ, IQ, QI, IVQ, IQV, VQI, VIQ, QIV,
QVI, OFF) (V is hidden if DELTAY_Y := DELTA)
ORDERY :=
PH DIR 3PH LVL (0.50–10.00 A [5 A I
YNOM
], 0.10–2.00 A [1 A I
YNOM
])
(Hidden if ELOADY:=Y)
50PDIRPY :=
FWD DIR Z2 LVL (–128.00 to 128.00 ohm [5 A I
YNOM
], –640.00 to 640.00 ohm [1 A
I
YNOM
]) (Hidden if EDIRY := AUTO)
Z2FY :=
REV DIR Z2 LVL (–128.00 to 128.00 ohm [5 A I
YNOM
], –640.00 to 640.00 ohm
[1 A I
YNOM
]) (Hidden if EDIRY := AUTO)
Z2RY :=
FWD DIR NSEQ LVL (0.25–5.00 A [5 A I
YNOM
], 0.05–1.00 A [1 A I
YNOM
])
(Hidden if EDIRY := AUTO)
50QFPY :=
REV DIR NSEQ LVL (0.25–5.00 A [5 A I
YNOM
], 0.05–1.00 A [1 A I
YNOM
])
(Hidden if EDIRY := AUTO)
50QRPY :=
I1 RST FAC I2/I1 (0.02–0.50) (Hidden if EDIRY := AUTO) a2Y :=
I0 RST FAC I2/I0 (0.10–1.20) (Hidden if EDIRY := AUTO) k2Y :=
FWD DIR RES LVL (0.05–5.00 A [5 A I
YNOM
], 0.01–1.00 A [1 A I
YNOM
])
(Hidden if EDIRY := AUTO or ORDERY does not contain V or I when EDIRY := Y)
50GFPY :=
REV DIR RES LVL (0.05–5.00 A [5 A I
YNOM
], 0.01–1.00 A [1 A I
YNOM
])
(Hidden if EDIRY := AUTO or ORDERY does not contain V or I when EDIRY := Y)
50GRPY :=
I1 RST FAC I0/I1 (0.02–0.50) (Hidden if EDIRY := AUTO or ORDERY does not
contain V or I when EDIRY := Y)
a0Y :=
FWD DIR Z0 LVL (–128.00 to 128.00 ohm [5 A I
YNOM
], –640.00 to 640.00 ohm
[1 A I
YNOM
]) (Hidden if EDIRY := AUTO or ORDERY does not contain V when
EDIRY := Y)
Z0FY :=
REV DIR Z0 LVL (–128.00 to 128.00 ohm [5 A I
YNOM
], –640.00 to 640.00 ohm
[1 A I
YNOM
]) (Hidden if EDIRY := AUTO or ORDERY does not contain V when
EDIRY := Y )
Z0RY :=
ZRO SQ MX TQ ANG (–90.00 to –5.00 and 5.00 to 90.00°)
(Hidden if EDIRY := AUTO or ORDERY does not contain V when EDIRY := Y)
Z0MTAY :=
X-Side Load Encroachment
(Hidden if Slot Z = 83/87 or Slot E = Empty/71/75)
FWD LD IMPEDANCE (OFF, 0.10–128.00 ohm [5 A I
XNOM
], 0.50–640.00 ohm
[1 A I
XNOM
])
ZLFX :=
POS-FWD LD ANGLE (–90.00 to +90.00°) (Hidden if ZLFX:=OFF) (PLAFX must be
greater than or equal to NLAFX)
PLAFX :=
NEG-FWD LD ANGLE (–90.00 to +90.00°) (Hidden if ZLFX:=OFF) (PLAFX must be
greater than or equal to NLAFX)
NLAFX :=
Y-Side Load Encroachment
(Shown if Slot E = 71/75)
LOAD ENCROACH EN (Y, N) ELOADY :=
(All Y-Side Load-Encroachment settings are hidden if ELOADY := N)
FWD LD IMPEDANCE (0.10–128.00 ohm [5 A I
YNOM
], 0.50–640.00 ohm
[1 A I
YNOM
])
ZLFY :=
POS-FWD LD ANGLE (–90.00 to +90.00°) (PLAFY must be greater than or
equal to NLAFY)
PLAFY :=
NEG-FWD LD ANGLE (–90.00 to +90.00°) (PLAFY must be greater than or
equal to NLAFY)
NLAFY :=
REV LD IMPEDANCE (0.10–128.00 ohm [5 A I
YNOM
],
0.50–640.00 ohm [1 A I
YNOM
])
ZLRY :=
POS-REV LD ANGLE (90.00–270.00°) (PLARY must be less than or
equal to NLARY)
PLARY :=
NEG-REV LD ANGLE (90.00–270.00°) (PLARY must be less than or
equal to NLARY)
NLARY :=