Schweitzer Engineering Laboratories SEL-700G Series, Инструкция по эксплуатации

Страница: 387 / 824

SET.11
of 68
Date Code 20170814 Instruction Manual SEL-700G Relay
SEL-700G Settings Sheets
Group Settings (SET Command)
ZERO SQ LN Z MAG (0.10–510.00 ohm [5 A I
XNOM
],
0.50–2550.00 ohm [1 A I
XNOM
])
Z0MAGX :=
ZERO SQ LN Z ANG (50.00–90.00°) Z0ANGX :=
DIR CONTROL LVL1 (F, R, N) DIR1X :=
DIR CONTROL LVL2 (F, R, N) DIR2X :=
GND DIR PRIORITY (I, V, Q, IV, VI, QV, VQ, IQ, QI, IVQ, IQV, VQI, VIQ, QIV,
QVI, U, OFF) (V and U are hidden if DELTAY_X := DELTA and
EXT3V0_X := NONE). (U is hidden when EDIRX := AUTO.)
ORDERX :=
FWD DIR Z2 LVL (–128.00 to 128.00 ohm [5 A I
XNOM
], –640.00 to 640.00 ohm
[1 A I
XNOM
]) (Hidden if EDIRX:=AUTO)
Z2FX :=
REV DIR Z2 LVL (–128.00 to 128.00 ohm [5 A I
XNOM
], –640.00 to 640.00 ohm
[1 A I
XNOM
]) (Hidden if EDIRX:=AUTO)
Z2RX :=
FWD DIR NSEQ LVL (0.25–5.00 A [5 A I
XNOM
], 0.05–1.00 A [1 A I
XNOM
])
(Hidden if EDIRX:=AUTO)
50QFPX :=
REV DIR NSEQ LVL (0.25–5.00 A [5 A I
XNOM
], 0.05–1.00 A [1 A I
XNOM
])
(Hidden if EDIRX:=AUTO)
50QRPX :=
I1 RST FAC I2/I1 (0.02–0.50) (Hidden if EDIRX:=AUTO) a2X :=
I0 RST FAC I2/I0 (0.10–1.20) (Hidden if EDIRX:=AUTO) k2X :=
FWD DIR RES LVL (0.05–5.00 A [5 A I
XNOM
], 0.01–1.00 A [1 A I
XNOM
])
(Hidden if EDIRX:=AUTO or ORDERX does not contain V or I when EDIRX:=Y)
50GFPX :=
REV DIR RES LVL (0.05–5.00 A [5 A I
XNOM
], 0.01–1.00 A [1 A I
XNOM
])
(Hidden if EDIRX:=AUTO or ORDERX does not contain V or I when EDIRX:=Y)
50GRPX :=
I1 RST FAC I0/I1 (0.02–0.50) (Hidden if EDIRX:=AUTO or ORDERX does not
contain V or I when EDIRX:=Y)
a0X :=
FWD DIR Z0 LVL (–128.00 to 128.00 ohm [5 A I
XNOM
], –640.00 to 640.00 ohm
[1 A I
XNOM
]) (Hidden if EDIRX:=AUTO or ORDERX does not contain V when
EDIRX:=Y )
Z0FX :=
REV DIR Z0 LVL (–128.00 to 128.00 ohm [5 A I
XNOM
], –640.00 to 640.00 ohm
[1 A I
XNOM
]) (Hidden if EDIRX:=AUTO or ORDERX does not contain V when
EDIRX:=Y )
Z0RX :=
ZRO SQ MX TQ ANG (–90.00 to 90.00°) (Hidden if EDIRX:=AUTO or ORDERX
does not contain V or U when EDIRX := Y )
Z0MTAX :=
FWD DIR IN LVL (0.25 to 5.00 A [5 A I
NNOM
], 0.05 to 1.00 A [1 A I
NNOM
])
(Displayed if EDIRX := Y and ORDERX := U, else hidden)
50NFP :=
REV DIR IN LVL (0.25 to 5.00 A [5 A I
NNOM
], 0.05 to 1.00 A [1 A I
NNOM
])
(Displayed if EDIRX := Y and ORDERX := U, else hidden)
50NRP :=
POS SQ RESTR FAC (0.001 to 0.500) (Displayed if EDIRX := Y and ORDERX := U,
else hidden)
a0N :=
Y-Side Directional Elements
(Hidden if Slot E = Empty/ 72/ 73/ 74/ 76/77)
DIR CONTROL ENBL (Y, AUTO, N) EDIRY :=
(All Y-Side Directional Elements settings are hidden if EDIRY := N)
FWD DIR ON LOP (Y, N) EFWDLOPY:=
POS SQ LN Z MAG (0.10–510.00 ohm [5 A I
YNOM
], 0.50–2550.00 ohm [1 A I
YNOM
]) Z1MAGY :=
POS SQ LN Z ANG (50.00–90.00°) Z1ANGY :=
ZERO SQ LN Z MAG (0.10–510.00 ohm [5 A I
YNOM
], 0.50–2550.00 ohm
[1 A I
YNOM
])
Z0MAGY :=
ZERO SQ LN Z ANG (50.00–90.00°) Z0ANGY :=
DIR CONTROL LVL1 (F, R, N) DIR1Y :=
DIR CONTROL LVL2 (F, R, N) DIR2Y :=