Schweitzer Engineering Laboratories SEL-700G Series, Инструкция по эксплуатации

Страница: 483 / 824

7.39
Date Code 20170814 Instruction Manual SEL-700G Relay
Communications
SEL ASCII Protocol and Commands
QUIT Command
Use the QUIT command (see Table 7.40) to revert to Access Level 0.
Access Level 0 is the lowest access level; the SEL-700G performs no
password check to descend to this level (or to remain at this level).
R_S Command (Restore s)
Use the R_S command (see Table 7.41) to restore factory-default settings.
SER Command (Sequential Events Recorder Report)
Use the SER commands (see Table 7.42 and Table 7.43) to view and manage
the Sequential Events Recorder report. See Section 9: Analyzing Events for
further details on SER reports.
Table 7.39 PUL OUTnnn Command
Command Description Access Level
PUL OUTnnn
a
a
Parameter nnn is a control output number.
Pulse output OUTnnn for 1 second. 2
PUL OUTnnn s
b
b
Parameter s is time in seconds, with a range of 1–30.
Pulse output OUTnnn for s seconds. 2
Table 7.40 QUIT Command
Command Description Access Level
QUIT Go to Access Level 0. 0
Table 7.41 R_S Command (Restore s)
Command Description Access Level
R_S Restore the factory-default settings and passwords
and reboot the system.
a
a
Only available after a settings or critical RAM failure.
2
Table 7.42 SER Command (Sequential Events Recorder Report)
Command Description Access Level
SER Use the SER command to display a chronological
progression of all available SER rows (as many as
1024 rows). Row 1 is the most recently triggered
row, and row 1024 is the oldest. 1
SER C or R Use this command to clear/reset the SER records. 1
Table 7.43 SER Command Format (Sheet 1 of 2)
Parameter Description
row1 Append row1 to return a chronological progression of the first
row1 rows. For example, use SER 5 to return the first five rows.
row1 row2 Append row1 and row2 to return all rows between row1 and
row2, beginning with row1 and ending with row2. Enter the smaller
number first to display a numeric progression of rows through the
report. Enter the larger number first to display a reverse numeric
progression of rows. For example, use SER 1 10 to return the first 10
rows in numeric order or SER 10 1 to return these same items in
reverse numeric order.