manualshive.com logo in svg

Schweitzer Engineering Laboratories SEL-700G Series, Инструкция по эксплуатации


Поделиться
Скачать
background image

D.10

SEL-700G Relay

Instruction Manual

Date Code 20170814

DNP3 Communications

DNP3 in the SEL-700G

time-synchronization messages.) It can be set to request time synchronization 
periodically by setting the TIMERQn setting to the necessary period. It can 
also be set to not request, but accept time synchronization (TIMERQn = M for 
“master”).

Modem Support

The SEL-700G DNP implementation includes modem support for serial ports. 
Your DNP3 master can dial-in to the SEL-700G and establish a DNP3 
connection. The SEL-700G can automatically dial out and deliver unsolicited 
DNP3 event data.

When the device dials out, it waits for the “CONNECT” message from the 
local modem and for assertion of the device CTS line before continuing the 
DNP transaction. This requires a connection from the modem DCD to the 
device CTS line.

NOTE: 

Contact SEL for information 

on serial cable configurations and 
requirements for connecting your 
SEL-700G to other devices.

You can either connect the modem to a computer and configure it before 
connecting it to the SEL-700G, or program the appropriate modem setup 
string in the modem startup string setting MSTR. You should use the 
PH_NUM1 and (optional) PH_NUM2 settings to set the phone numbers that 
you want the SEL-700G to call. The SEL-700G automatically sends the 
ATDT modem dial command and then the contents of the PH_NUM1 setting 
when dialing the modem. If PH_NUM2 is set, the RETRY1 setting is used to 
configure the number of times the SEL-700G tries to dial PH_NUM1 before 
dialing PH_NUM2. Similarly, the RETRY2 setting is the number of attempts 
the SEL-700G tries to dial PH_NUM2 before trying PH_NUM1. MDTIME 
sets the length of time from initiating the call to declaring it failed because of 
no connection, and MDRET sets the time between dial-out attempts.

NOTE: 

RTS/CTS hardware flow 

control is not available for a DNP3 
modem connection. You must use 
either X-ON/X-OFF software flow 
control or set the port data speed 
slower than the effective data rate of 
the modem.

The settings PH_NUM1 and PH_NUM2 must conform to the AT modem 
command set dialing string standard, including:

➤

A comma (,) inserts a four second pause

➤

If necessary, use a 9 to reach an outside line

➤

Include a 1 and the area code if the number requires long 
distance access

➤

Add any special codes your telephone service provider 
designates to block call waiting and other telephone line 
features.

DNP3 Settings

The DNP3 port configuration settings available on the SEL-700G are shown 
in Table D.7. You can enable DNP3 on Ethernet Port 1 or on any of the serial 
Ports 2 through 4, to a maximum of three concurrent DNP3 sessions. Each 
session defines the characteristics of the connected DNP3 Master, to which 
you assign one of the three available custom maps. 

Because some settings apply only to serial DNP3, they are visible only when 
configuring a serial port. Likewise, settings that apply only to DNP3 LAN/
WAN are visible only when configuring the Ethernet port.

For example, you only have the ability to define multiple sessions on Port 1, 
the Ethernet port. The IP address for each session must be unique. Setting the 
IP address to 0.0.0.0 allows any master IP address to connect to the session, as 
long as that IP address is not configured for another DNP3 session. Only one 
connection is supported on the session at a time.

Extreme care should be observed to ensure network security, especially when 
setting the IP address to 0.0.0.0, as there is no limitation on the DNP3 master 
that may connect to the session.

Содержание SEL-700G Series

























































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SEL-700G Series

IFM Electronic G1501S Connection Examples preview
G1501S
Бренд: IFM Electronic Страницы: 15
Renogy RSHSRZ02P User Manual preview
RSHSRZ02P
Бренд: Renogy Страницы: 14
Eaton ESR5-BWS-31-24VDC Manual preview
ESR5-BWS-31-24VDC
Бренд: Eaton Страницы: 50
LynTec NPAC Instruction Bulletin preview
NPAC
Бренд: LynTec Страницы: 41
Elko SMR-B Manual preview
SMR-B
Бренд: Elko Страницы: 3
Elko CRM-100 Manual preview
CRM-100
Бренд: Elko Страницы: 3
ZIEHL MSF 220 SE Operating Manual preview
MSF 220 SE
Бренд: ZIEHL Страницы: 4
Guard master Minotaur MSR15D Installation Instructions preview
Minotaur MSR15D
Бренд: Guard master Страницы: 4
TECO SG2 PLR User Manual preview
SG2 PLR
Бренд: TECO Страницы: 66
Taco Comfort Solutions SR502-4 Instruction Sheet preview
SR502-4
Бренд: Taco Comfort Solutions Страницы: 2
ABB RELION REX640 Operation Manual preview
RELION REX640
Бренд: ABB Страницы: 140
MSEL Master Relay User Manual preview
Master Relay
Бренд: MSEL Страницы: 24
IDEC SmartRelay FL1A-H12RCE Manual preview
SmartRelay FL1A-H12RCE
Бренд: IDEC Страницы: 209
Zander Aachen SR3C Operating Instructions preview
SR3C
Бренд: Zander Aachen Страницы: 4
Broadcast Tools SR-4 Installation And Operation Manual preview
SR-4
Бренд: Broadcast Tools Страницы: 17
Broadcast Tools SS 4.1 MLR Installation And Operation Manual preview
SS 4.1 MLR
Бренд: Broadcast Tools Страницы: 19
Areva MiCOM P125 Technical Manual preview
MiCOM P125
Бренд: Areva Страницы: 362
Areva MiCom P120 Technical Manual preview
MiCom P120
Бренд: Areva Страницы: 668

Бренды по названию

Популярные бренды

Загрузить еще бренды