Racal Instruments 3152A, Руководство пользователя

Страница: 54 / 176

3152A User Manual
Using The Instrument 3-16 Racal Instruments
©
2001
Selecting the
SYNC Position
The SYNC output can be programmed to output the SYNC
signal at any point along the output waveform. Use the following
command to select the SYNC output position:
OUTPut:SYNC:POSition[:POINt] <value>
The SYNC position can be selected from point 0 to the last point
of the active waveform. SYNC position has to be programmed
for each segment. The default SYNC position is 6 points from
the end of the segment.
The query:
OUTPut:SYNC:POSition:POINt?
Queries the output SYNC position and returns an integer value.
Setting the Sync
Pulse Width
The sync output can be programmed to output a pulse with a
programmable pulse width. Use the following command to set
the sync pulse width:
OUTPut:SYNC:WIDTh <value>
The sync pulse width can be set to any number between 2 and
500 points. Sync width can be calculated by multiplying the
Sampling Clock Period x OUTP:SYNC:WIDTh.
The query:
OUTPut:SYNC:WIDTh?
Queries the output sync width and returns an integer value.