Porsche 718 Spyder, Руководство пользователя

Страница: 228 / 309

225
Tires and Wheels
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Care of wheel attachment faces
Fig. 196: Wheel attachment faces
Care of wheel bolts
e
Clean the wheel bolts before installation.
e
Wheel bolts must not be greased.
e
Replace damaged wheel bolts. Only use genuine
Porsche wheel bolts assigned especially to this
model or wheel bolts of similar quality that have
been manufactured according to Porsche specifi-
cations and production requirements.
e
Tighten wheel bolts with a tightening torque of
118 lb-ft (160 Nm).
Use security wheel bolts
Fig. 197: Adapter for security wheel bolts
The adapter for the security wheel bolts is located in
the tool box.
e
To loosen and tighten the wheel bolt with
antitheft protection, the adapter must be used
between the wheel bolt and the wheel bolt
wrench.
e
When positioning the adapter ensure that it
engages fully in the teeth of the wheel bolt.
Information
The tire and wheel sizes on both axles are different.
When removing the wheels, mark the direction of
rotation and position on each wheel and carry out the
installation according to these markings.
e
Only use wheels/tires with approved dimensions
for the relevant axle.
NOTICE
Risk of damage to the wheel and wheel attachment
face.
e
Wheel attachment face B on the brake disk and on
the wheel itself must not be lubricated.
e
Only lubricate faces A . Grease these areas very
thinly with Optimoly® TA: Contact an authorized
Porsche dealer.
Do not use any other grease or compound.
21_718_GT4_Spyder_BAL_21_WKD 982 02 21 21_KW36.20-24.21_en_US.book Seite 225 Freitag, 24. Juli 2020 11:31 11