Porsche 718 Spyder, Руководство пользователя

Страница: 223 / 309

220
Tires and Wheels
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Tread
The portion of the tire that comes in contact with the
road.
Tire pressure plate
A label in the door sill area at the driver’s door
providing information about seating capacity, vehicle
load limit, original tire size and recommended infla-
tion pressure.
Tire Identification Number (TIN)
An identification number on radial tires providing
informationabout the manufacturer, tire size, tire
type and date of manufacture.
Inflation pressure
A measure of the amount of air in the tire. The tire
pressure is measured in kilopascals (kPa), pounds per
square inch (psi) or bar.
Cold inflation pressure
The tire pressure of a cold tire with ambient temper-
ature maximum 68 °F / 20 °C and the vehicle out of
direct sunlight exposure.
Maximum permissible inflation pressure
The maximum cold inflation pressure to which a tire
may be inflated.
Recommended inflation pressure
The cold inflation pressure found on the tire pressure
plate.
kPa (Kilopascal)
A metric unit for tire pressure.
PSI (Pounds per square inch)
A standard unit for tire pressure.
f
Please see chapter „Loading Information“ on
page 281.
Overloading
Inflating tires
The compressor is located under the cover in the
front luggage compartment.
f
Please see chapter „Removing and stowing the
tire filling compressor“ on page 126.
f
Comply with the operating instructions on the
compressor.
1. Screw the compressor filler hose onto the tire
valve.
2. Connect the compressor to a socket in the vehicle
and switch on the compressor.
The tire is inflated.
3. Check the inflation pressure with the pressure
gauge and reduce the tire pressure or continue
filling as required. Check the tire pressure once
again.
4. Switch off the compressor.
5. Unscrew the compressor filler hose.
Reducing inflation pressure
1. Switch off the compressor.
2. Open air bleed screw on the filling hose until the
correct inflation pressure is achieved.
DANGER
Overloading Tires
Overloading can lead to dangerous vehicle reactions
and long braking distances.
e
Do not overload your vehicle. Be careful about the
roof load.
e
If you plan to load the vehicle, first correct the tire
pressure. Tire pressure for loaded vehicle can be
found on the tire pressure plate and in the chapter
technical data.
e
Never exceed the specified axle load.
NOTICE
Risk of damage to the vehicle and to the tires.
Damage due to overloading is not covered by the
vehicle warranty.
e
Do not overload your vehicle. Be careful about the
roof load.
e
If you plan to load the vehicle, first correct the tire
pressure. Tire pressure for loaded vehicle can be
found on the tire pressure plate and in the chapter
technical data.
e
Never exceed the specified axle load.
CAUTION
Hot Filler Hose
The compressor filler hose can become hot during
filling and cause burns.
e
Wear gloves.
Information
You can also check the tire pressure and inflate your
tires at service stations.
21_718_GT4_Spyder_BAL_21_WKD 982 02 21 21_KW36.20-24.21_en_US.book Seite 220 Freitag, 24. Juli 2020 11:31 11