Porsche 718 Spyder, Руководство пользователя

Страница: 122 / 309

119
Lap Trigger
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Installing the transmitter at the
edge of the circuit
Fig. 87: Installing the transmitter
A commercially available camera tripod, for example,
can be used for adjusting the transmitter height.
Alternatively the transmitter can be placed on a flat,
firm surface.
1. Position transmitter A at the edge of the circuit at
the start line at the same level as the receiver in
the vehicle.
2. Align transmitter A parallel to the track.
Connecting the power supply for
the transmitter
Fig. 88: Power supply for the transmitter
A commercially available motorcycle or car battery,
for example, can be used for the power supply to the
transmitter.
e
Make sure that the battery is sufficiently charged.
1. Insert the red cable into the red connection on the
transmitter.
2. Insert the black cable into the black connection
on the transmitter.
3. Connect the red cable to the positive terminal ( + )
of the battery.
4. Connect the black cable to the negative terminal
(
- ) of the battery.
Starting timing
The first lap must be started manually. The lap times
are then recorded automatically.
f
Please see chapter „Starting timing“ on
page 201.
Information
If multiple vehicles with the Porsche lap trigger
system will be driving on a race circuit, only one
transmitter should be installed. The receiver cannot
differentiate the transmitters and detects each
passing of a transmitter as a new lap.
NOTICE
Risk of damage to the transmitter.
The airflow from passing vehicles can cause the
transmitter to fall down or tip over.
e
Choose the transmitter location so that a safe, firm
position is ensured.
NOTICE
Risk of damage due to short circuit.
e
Keep the battery dry.
e
Make sure the polarity is correct.
e
Chrono
e
Start
21_718_GT4_Spyder_BAL_21_WKD 982 02 21 21_KW36.20-24.21_en_US.book Seite 119 Freitag, 24. Juli 2020 11:31 11