Polaris 2014 Sportsman 570 EF, Руководство по обслуживанию

Страница: 45 / 456

2
2.25
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
3. Move the seal out of the sealing channel and pull up
on the front of the access cover. Remove the access
cover.
4. The pressure cap is now accessible.
5. Remove the pressure cap and inspect fluid level.
Using a funnel, add coolant until the fluid level is to
the top of the filler neck.
6. Reinstall the pressure cap and install the front
access cover.
Cooling System Hoses
1. Inspect all hoses for cracks, deterioration, abrasion
or leaks. Replace if necessary.
2. Check tightness of all hose clamps.
CAUTION
Do not over-tighten hose clamps at radiator,
or radiator fitting may distort,
causing a restriction to coolant flow.
Radiator hose clamp torque is 36 in-lbs (4 Nm).
Cooling System Pressure Test
System Pressure Test
1. Remove radiator cap cover located under the
storage box access panel. See Chapter 3.
2. Remove recovery bottle hose from coolant filler.
3. Connect a Mity-Vac™ ( PN 2870975 ) to radiator and
pressurize system to 10 PSI (68.9 kpa). The system
must retain 10 lbs of pressure for five minutes or
longer. If pressure loss is evident within five minutes,
check radiator, all cooling system hoses and clamps,
or water pump seal.
Radiator Cap Pressure Test
4. Remove radiator cap and test using a cap tester
(commercially available).
5. The radiator cap relief pressure is 13 lbs (89.6 kpa).
Recommended Coolant
Use only high quality antifreeze/coolant mixed with
distilled water in a 50/50 or 60/40 ratio, depending on
freeze protection required in your area.
MAINTENANCE