Polaris 2014 Sportsman 570 EF, Руководство по обслуживанию

Страница: 413 / 456

10
10.33
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
FUEL SENDER
Testing
1. Drain the fuel tank and remove it from the ATV.
2. Set the fuel tank on a flat surface.
3. Hook up an ohm meter to the fuel sender harness wire (B) and wire (C).
4. With the sender float in the empty position , the meter should read 6 ohm s.
5. Slowly tilt invert the tank so that gravity moves the sender float to the full position , the meter should now read 90
ohms.
6. If the readings are not between 6 ohms and 90 ohms , or if the reading is erratic or LCD display “sticks”, check the
following before replacing the tank assembly.
• Loose float
• Float contact with tank
• Bent Float Rod
If none of the conditions exists, the sender assembly is faulty.
NOTE: **In the event of a failure, fuel tank assembly replacement is required on ALL models, as the
sender assembly or pump assembly is not serviceable.
ELECTRICAL