Polaris 2014 Sportsman 570 EF, Руководство по обслуживанию

Страница: 37 / 456

2
2.17
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
7. Remove the drain plug. Allow oil to drain completely.
8. Replace sealing washer on drain plug.
NOTE: The sealing surfaces on the drain plug
and the oil tank should be clean and free of
burrs, nicks or scratches.
9. Reinstall the drain plug and torque it to specification.
Oil pan Drain Plug: 14–18 ft-lbs (19–24 Nm)
10. Place a drain pan under the oil filter.
11. Place shop towels beneath oil filter. Use Oil Filter
Wrench ( PV-50105 ), turn filter counterclockwise to
remove.
12. Using a clean dry cloth, clean filter sealing surface
on the crankcase.
13. Lubricate the o-ring on new filter with a thin film of
engine oil. Check to make sure the O-ring is in good
condition.
14. Install the new filter and turn it by hand until the filter
gasket contacts the sealing surface, then turn an
additional 1/2 of a turn.
15. Remove dipstick (see “Engine Oils Level”).
16. Add two quarts (1.9 l) of of Polaris Premium 4
Synthetic Oil.
17. Place the transmission in PARK (P).
18. Verify that the transmission is still positioned in
PARK (P).
19. Start the engine. Allow it to idle for two minuets.
20. Stop the engine and check for leaks.
21. Check the oil level on the dipstick and add oil as
necessary to bring the level to the upper mark on the
dipstick.
22. Dispose of used filter and oil properly.
MAINTENANCE