Polaris 2014 Sportsman 570 EF, Руководство по обслуживанию

Страница: 298 / 456

7.16
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
5. Inspect the rollers for nicks, scratches, and flat spots.
Also inspect the roll cage for cracks and ensure the
rollers are able to slide up and down and in and out
freely within the roll cage sliding surfaces.
Setting Ring Gear Backlash NON ADC
NOTE: Ring gear backlash is set at the factory. No
adjustment is required, unless the front cover is
replaced or the back lash pad screw is removed.
1. The backlash screw has locking agent that holds it
into place. Use a heat gun to lightly heat up the
locking agent on the screw.
2. Using a hex wrench, turn the back-lash screw out 3-4
turns. Re-apply Loctite® 262™ onto the bottom
screw threads.
3. Turn the screw in until it is lightly seated, then turn
the screw out 1/4 turn.
4. Set the gearcase upright. Rotate the input shaft at
least 4 times. This ensures the ring gear completes
one full rotation.
5. If a tight spot is felt during rotation, loosen the
backlash screw another 1/8 turn. Perform step 4
again. Repeat this procedure until the pinion shaft
rotates smoothly 4 times (1 revolution of ring gear).
6. The gearcase may be filled with the recommended
amount of lubricant once gearlash procedure is
complete.
FINAL DRIVE